BRAZING
Brand New Lenox WS78171 15% Silver Brazing Rods $151.00 | Replacement Flints, 10-Pk $3.00 |
Brand New Supco HS30004 Solderlene Low Temperature Paste Flux Petroleum based, non-acid Special wetting agents promote solder flow Use with all low temperature solders and on all metals except aluminum and magnesium 4 oz. size $6.00 | Brand New Wolverine Ultra Flux Silver Brazing FLux For high-temperature brazing (effective to 1600F) Use with phos/copper alloys when brazing copper-to-brass Use with high-silver alloys for copper-to-brass, copper-to-steel, and steel-to-brass 7 oz. brush top container $6.50 |
esigned for light-duty cutting, brazing and heating jobs Stainless steel needle valves Solid one-piece tip and mixer design Includes: Torch handle, oxygen regulator/acetylene regulator, check valves, striker and goggles 12-1/2' twin hose, "A" fitting 3/16" One-year warranty Refer to the following chart for additional components $237.00 | Brand New Uniweld KC100PT Oxy-Acetylene Brazing Outfit With Tanks Capable of brazing up to 1" copper tubing and welding up to 1/8" steel (with supplied tips) Includes Centurion regulators Two-year warranty Includes welding handle (Mfg.# 71), two welding/brazing tips (Type 17-0, Type 17-2), oxygen regulator (RO100), acetylene regulator (RMC100), twin hose, safety goggles, flint lighter and plastic carrying stand H85-440 also includes cutting attachment (CA100) and cutting tip (CT100-0) $345.00 |
Watch the video here : http://www.hvacsuperpro.com/Video/HVACSuperPro_v2.wmv Made in USA. Guaranteed to work by Manufacturer! Brand New HVAC SUPER PRO Solderless Bonding is a single part, scientifically formulated anaerobic polymer that has a positive valance which gives it an affinity for copper, brass and aluminum. HVAC SUPER PRO can be used to bond copper, brass, and aluminum in any combination. HVAC SUPER PRO is formulated specifically for the the HVAC/R industry, requires less installation time than traditional brazing, plus eliminates the risk of fire, burns, and damage to electronic circuits. Once bonded, HVAC SUPER PRO is as permanent as a brazed joint and guaranteed to last the life of the system. HVAC SUPER PRO starts to set-up (change from a liquid to a solid state) in 10-seconds. Do not handle the bond after 10-seconds and before 3 minutes as this will break the bond and the bond will leak. After 3 minutes, the bond can be handled. When bonding aluminum, do not handle the bond between 10-seconds and 5 minutes. After 5 minutes, the bond on aluminum can be handled. In 12 minutes, the bond on copper or brass will withstand 850psi of refrigerant pressure. When fully cured (approximately 2 hours) the bond will withstand 1200psi of refrigerant pressure. Aluminum requires 20 minutes before the bond reaches 850psi. HVAC SUPER PRO is compatible with all refrigerants and oils. HVAC SUPER PRO can be used with standard ANSI copper or brass fittings. There is no need for costly fittings, crimping tools, or crimps. Temperature range after cure: -65 to 350F (-54C to 176C). Maximum continuous pressure after cure: 1200psi. Works on all types of round copper, brass, and aluminum tubing (the tubing must be round and fit the connector properly at the bonding area). Fill space: 20 thousandths of an inch. Adherence Strength (ASTM 4541): Pull-apart: 1500 foot pounds on 3/4-inch tubing; Rotational: 450 foot pounds on 1/2-inch tubing. A HVAC SUPER PRO bond will come apart when heated above 450F. It is critical to sand the outside of the tubing and the inside of the fitting with 60-grit sanding cloth. 60-grit sanding cloth is included with each package of HVAC SUPER PRO. Using any sanding medium or a wire brush will result in an inferior bond, and nullifies all HVAC SUPER PRO warranties and guarantees. MSDS File: http://www.hvacsuperpro.com/PDFs/MSDS%202009.pdf Regular price: $45.00 Sale price: $28.50 |
PLACE YOUR ORDER ONLINE NOW FOR A CHANCE TO WIN $50 CASH AND AN APPLE IPAD!
IF YOU DON'T SEE WHAT YOU'RE LOOKING FOR PLEASE CONTACT US AT 626-961-8822 OR EMAIL admin@gsistore.com
Please note some of the items require professional knowledge and skills to handle or installed. GSIstore is not responsible for any damage or injuries resulted from mishandling of professional products. All HVACR equipment should be serviced/installed by certified professionals only. Please let us know if you have any concerns or questions. Liability in all events is limited to purchase price paid. Price and availability subject to change without notice, GSIstore will notify buyer with such order within one business day. Please order based on manufacturer part numbers, pictures are for general reference only and actual item may look different.
Click here if you found our product cheaper somewhere else or can't find what you need at all. Don't forget to send us the cheaper link and your zip code for our best offer!
IF YOU DON'T SEE WHAT YOU'RE LOOKING FOR PLEASE CONTACT US AT 626-961-8822 OR EMAIL admin@gsistore.com
Please note some of the items require professional knowledge and skills to handle or installed. GSIstore is not responsible for any damage or injuries resulted from mishandling of professional products. All HVACR equipment should be serviced/installed by certified professionals only. Please let us know if you have any concerns or questions. Liability in all events is limited to purchase price paid. Price and availability subject to change without notice, GSIstore will notify buyer with such order within one business day. Please order based on manufacturer part numbers, pictures are for general reference only and actual item may look different.
