HVAC SUPER PRO VIDEO Made in USA. Guaranteed to work by Manufacturer! Brand New HVAC SUPER PRO Solderless Bonding is a single part, scientifically formulated anaerobic polymer that has a positive valance which gives it an affinity for copper, brass and aluminum. HVAC SUPER PRO can be used to bond copper, brass, and aluminum in any combination. HVAC SUPER PRO is formulated specifically for the the HVAC/R industry, requires less installation time than traditional brazing, plus eliminates the risk of fire, burns, and damage to electronic circuits. Once bonded, HVAC SUPER PRO is as permanent as a brazed joint and guaranteed to last the life of the system. HVAC SUPER PRO starts to set-up (change from a liquid to a solid state) in 10-seconds. Do not handle the bond after 10-seconds and before 3 minutes as this will break the bond and the bond will leak. After 3 minutes, the bond can be handled. When bonding aluminum, do not handle the bond between 10-seconds and 5 minutes. After 5 minutes, the bond on aluminum can be handled. In 12 minutes, the bond on copper or brass will withstand 850psi of refrigerant pressure. When fully cured (approximately 2 hours) the bond will withstand 1200psi of refrigerant pressure. Aluminum requires 20 minutes before the bond reaches 850psi. HVAC SUPER PRO is compatible with all refrigerants and oils. HVAC SUPER PRO can be used with standard ANSI copper or brass fittings. There is no need for costly fittings, crimping tools, or crimps. Temperature range after cure: -65 to 350F (-54C to 176C). Maximum continuous pressure after cure: 1200psi. Works on all types of round copper, brass, and aluminum tubing (the tubing must be round and fit the connector properly at the bonding area). Fill space: 20 thousandths of an inch. Adherence Strength (ASTM 4541): Pull-apart: 1500 foot pounds on 3/4-inch tubing; Rotational: 450 foot pounds on 1/2-inch tubing. A HVAC SUPER PRO bond will come apart when heated above 450F. It is critical to sand the outside of the tubing and the inside of the fitting with 60-grit sanding cloth. 60-grit sanding cloth is included with each package of HVAC SUPER PRO. Using any sanding medium or a wire brush will result in an inferior bond, and nullifies all HVAC SUPER PRO warranties and guarantees. MSDS File: http://www.hvacsuperpro.com/PDFs/MSDS%202009.pdf Regular price: $45.00 Sale price: $28.75 | The first and original nickel-safe ice machine cleaner made for use on machines with nickel-plated evaporators like Manitowoc, Hoshizaki, Ice-o-matic, Scotsman.
A specially formulated product for removing scale deposits from ice machines having nickel-plated or tin-plated evaporators. Acceptable for use on Manitowoc and other manufacturers using nickel plated evaporators. It is available in pints and gallons, and it mixes to form a green cleaning solution which makes rinsing easier. Specially formulated food-grade product, removes scale deposits from ice machines with nickel or tin-plated evaporators Meets Manitowoc specification #GES-6 and is approved by other manufacturers using nickel 2-3 fl. oz. of cleaner per gallon of water in ice machine 16 oz. $7.75, 3/$22.65, 6/$44.70, 12/$88.20 |
Brand New Refrigerant R-22 30lbs (EPA License / Resale Statement Required to Purchase) Customer can set up their own shipping agent to pick up. Limited Quantity at this price. Regular price: $599.00 Sale price: $480.00 | Brand New Turbo Torch 0916-0004 Gas Cylinder Propane Cylinder, 14.1 oz. Disposable cylinders for use with TurboTorch and other hand torches Pick Up Only $6.50 |
Click here if you found our product cheaper somewhere else or can't find what you need at all. Don't forget to send us the cheaper link and your zip code for our best offer!