{"product_id":"copeland-998-0669-13","title":"Copeland 998-0669-13 Gasket Kit","description":"\u003cp\u003eThe \u003cstrong\u003eCopeland 998-0669-13 Gasket Kit\u003c\/strong\u003e is the OEM-specified \u003cstrong\u003ecomplete gasket set\u003c\/strong\u003e for Copeland's \u003cstrong\u003eK-body semi-hermetic compressor\u003c\/strong\u003e line, covering the broad K-series lineup: \u003cstrong\u003eKAE, KAH, KAJ, KAK, KAT, KAG, KAL, KAA, KAM, and KAN\u003c\/strong\u003e models. It supplies every gasket needed to reseal the compressor from head to crankcase — \u003cstrong\u003ehead gasket, valve plate gasket, and crankcase gaskets\u003c\/strong\u003e — restoring the seal integrity that keeps refrigerant and oil contained under the high cycling loads typical of commercial refrigeration and air conditioning duty. This is the correct genuine-Copeland kit to reach for any time a \u003cstrong\u003eK-series compressor\u003c\/strong\u003e is opened for valve plate service, crankcase inspection, or any repair that breaks the head-to-body seal.\u003c\/p\u003e\n\n\u003cp\u003eBecause the K-body platform spans ten separate model prefixes, technicians sometimes confuse this kit with the narrower \u003cstrong\u003e998-0669-15 Gasket Set\u003c\/strong\u003e, which Copeland specifies only for the \u003cstrong\u003eKAL and KAT models\u003c\/strong\u003e within the same family — order the \u003cstrong\u003e998-0669-13\u003c\/strong\u003e kit whenever the compressor falls outside that narrower KAL\/KAT scope, or when standardizing gasket stock across multiple K-series units. Every gasket in the set is manufactured to \u003cstrong\u003eCopeland's original material specification and thickness\u003c\/strong\u003e, which matters for maintaining correct valve plate clearance and preventing the compression-ratio drift that undersized aftermarket gaskets can cause.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad K-Series Coverage:\u003c\/strong\u003e One kit correctly fits ten K-body model variants — \u003cstrong\u003eKAE, KAH, KAJ, KAK, KAT, KAG, KAL, KAA, KAM, and KAN\u003c\/strong\u003e — reducing the number of gasket SKUs a shop needs to stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Reseal In One Kit:\u003c\/strong\u003e Includes the \u003cstrong\u003ehead gasket\u003c\/strong\u003e, \u003cstrong\u003evalve plate gasket\u003c\/strong\u003e, and \u003cstrong\u003ecrankcase gaskets\u003c\/strong\u003e needed for a full compressor teardown and reassembly, not just a single seal point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Material Spec:\u003c\/strong\u003e Manufactured to Copeland's original gasket thickness and material, preserving correct \u003cstrong\u003evalve plate clearance\u003c\/strong\u003e and compression ratio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Copeland Fit:\u003c\/strong\u003e Eliminates the leak call-backs that come from generic aftermarket gasket sets that don't match factory tolerances on \u003cstrong\u003eK-series compressors\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit every K-series Copeland compressor?\u003c\/strong\u003e It covers the \u003cstrong\u003eKAE, KAH, KAJ, KAK, KAT, KAG, KAL, KAA, KAM, and KAN\u003c\/strong\u003e models. For a compressor limited to \u003cstrong\u003eKAL\u003c\/strong\u003e or \u003cstrong\u003eKAT\u003c\/strong\u003e only, the narrower \u003cstrong\u003e998-0669-15\u003c\/strong\u003e gasket set is also a valid, more specific option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e A full set of \u003cstrong\u003ehead, valve plate, and crankcase gaskets\u003c\/strong\u003e sized for the \u003cstrong\u003eK-body\u003c\/strong\u003e platform — everything needed to reseal the compressor after opening it for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhen do I need this kit?\u003c\/strong\u003e Any time a \u003cstrong\u003eK-series compressor\u003c\/strong\u003e is opened for valve plate replacement, crankcase work, or head removal — reusing old gaskets after disassembly risks a refrigerant or oil leak.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDisclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.\u003c\/p\u003e","brand":"Copeland","offers":[{"title":"Default Title","offer_id":48080976969906,"sku":"998-0669-13","price":103.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1838\/2375\/files\/ac-parts-1000x1000_d8f6c0df-eeb5-4a7f-8ee2-4f92681ea310.webp?v=1755632728","url":"https:\/\/www.gsistore.com\/en-ca\/products\/copeland-998-0669-13","provider":"GSIstore","version":"1.0","type":"link"}