{"product_id":"weil-mclain-511-405-133","title":"Weil McLain 511-405-133 Cartridge Circulator","description":"\u003cp\u003eThe \u003cstrong\u003eWeil McLain 511-405-133 Cartridge Circulator\u003c\/strong\u003e is a \u003cstrong\u003eTaco 0014-F1-3\u003c\/strong\u003e \u003cstrong\u003ewet-rotor\u003c\/strong\u003e cartridge circulator supplied \u003cstrong\u003ewithout flanges\u003c\/strong\u003e. The cast \u003cstrong\u003evolute\u003c\/strong\u003e has the flange ports, but the companion \u003cstrong\u003eflanges\u003c\/strong\u003e are not part of the pump, which makes it a practical choice when the \u003cstrong\u003eflanges\u003c\/strong\u003e on your existing piping are staying put or you already have a matching pair on the shelf. The pump is rated \u003cstrong\u003e1\/8 HP\u003c\/strong\u003e, runs on \u003cstrong\u003e115 V, 60 Hz\u003c\/strong\u003e power, draws \u003cstrong\u003e1.45 A\u003c\/strong\u003e and turns at \u003cstrong\u003e3250 RPM\u003c\/strong\u003e. If you are searching by the Taco number \u003cstrong\u003e0014-F1-3\u003c\/strong\u003e or the Weil McLain number \u003cstrong\u003e511-405-133\u003c\/strong\u003e, this is the pump behind both.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003enameplate\u003c\/strong\u003e on the \u003cstrong\u003e0014-F1-3\u003c\/strong\u003e reads \u003cstrong\u003e150 PSI\u003c\/strong\u003e maximum pressure and \u003cstrong\u003e230°F (110°C)\u003c\/strong\u003e maximum water temperature. Next to the \u003cstrong\u003e511-405-113\u003c\/strong\u003e (the \u003cstrong\u003eTaco 007-F5\u003c\/strong\u003e, rated \u003cstrong\u003e1\/25 HP\u003c\/strong\u003e and \u003cstrong\u003e125 PSI\u003c\/strong\u003e), this is the heavier motor with the higher pressure rating, so do not swap one for the other by guesswork. Compare the label on the pump you are replacing with the numbers here. This is a \u003cstrong\u003ewet-rotor\u003c\/strong\u003e design: the \u003cstrong\u003erotor and bearings\u003c\/strong\u003e run in the system water, which lubricates and cools them. There is no \u003cstrong\u003eshaft seal\u003c\/strong\u003e to leak, but the pump must never run dry, so \u003cstrong\u003epurge the loop of air\u003c\/strong\u003e before you call the job done.\u003c\/p\u003e\n\n\u003cp\u003ePlan the installation around the missing \u003cstrong\u003eflanges\u003c\/strong\u003e. The pump is pictured with two \u003cstrong\u003eflange gaskets\u003c\/strong\u003e, and you will need a pair of \u003cstrong\u003eflanges\u003c\/strong\u003e that match your piping to bolt it in. Use fresh \u003cstrong\u003egaskets\u003c\/strong\u003e instead of reusing old ones, make sure the flange faces are clean and flat, and tighten the bolts evenly in a \u003cstrong\u003ecross pattern\u003c\/strong\u003e so the \u003cstrong\u003evolute\u003c\/strong\u003e seals without being pulled out of square. Wet-rotor circulators are normally mounted with the \u003cstrong\u003emotor shaft horizontal\u003c\/strong\u003e, so check the orientation before you pipe it in and make sure the pump is set up for the direction of flow.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSupplied Without Flanges:\u003c\/strong\u003e Order the circulator by itself and reuse or match your own \u003cstrong\u003eflanges\u003c\/strong\u003e, instead of buying a flange set you do not need.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e1\/8 HP Wet-Rotor Motor:\u003c\/strong\u003e \u003cstrong\u003e1.45 A\u003c\/strong\u003e at \u003cstrong\u003e115 V\u003c\/strong\u003e with the \u003cstrong\u003erotor and bearings\u003c\/strong\u003e lubricated and cooled by the system water.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e150 PSI, 230°F Ratings:\u003c\/strong\u003e Printed on the \u003cstrong\u003enameplate\u003c\/strong\u003e, with more pressure headroom than the \u003cstrong\u003e125 PSI\u003c\/strong\u003e rating of the \u003cstrong\u003e511-405-113\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFactory Service Number:\u003c\/strong\u003e \u003cstrong\u003e511-405-133\u003c\/strong\u003e is the Weil McLain number for the \u003cstrong\u003eTaco 0014-F1-3\u003c\/strong\u003e, so the number you search is the number you order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhat Taco model is the 511-405-133?\u003c\/strong\u003e It is the \u003cstrong\u003eTaco 0014-F1-3\u003c\/strong\u003e cartridge circulator. The label on the pump reads \u003cstrong\u003eCARTRIDGE CIRCULATOR 0014-F1-3\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDoes this circulator include flanges?\u003c\/strong\u003e No. It is supplied without \u003cstrong\u003eflanges\u003c\/strong\u003e, and the pump is pictured with two \u003cstrong\u003eflange gaskets\u003c\/strong\u003e. Have a matching pair of \u003cstrong\u003eflanges\u003c\/strong\u003e ready before you start the job.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHow do I know this is the right circulator for my boiler?\u003c\/strong\u003e Read the \u003cstrong\u003enameplate\u003c\/strong\u003e on the pump you are replacing. If it shows \u003cstrong\u003e0014-F1-3\u003c\/strong\u003e, \u003cstrong\u003e1\/8 HP\u003c\/strong\u003e, \u003cstrong\u003e115 V\u003c\/strong\u003e and \u003cstrong\u003e3250 RPM\u003c\/strong\u003e, you are looking at the same pump. Send us your boiler model and we will confirm the match before you buy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDisclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.\u003c\/p\u003e","brand":"Weil McLain","offers":[{"title":"Default Title","offer_id":67955913359538,"sku":"511-405-133","price":807.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1838\/2375\/files\/511-405-133.jpg?v=1794255863","url":"https:\/\/www.gsistore.com\/en-ca\/products\/weil-mclain-511-405-133","provider":"GSIstore","version":"1.0","type":"link"}