{"product_id":"york-s1-026-47782-000","title":"York S1-026-47782-000 Fan Propeller","description":"\u003cp\u003eThe \u003cstrong\u003eYork S1-026-47782-000\u003c\/strong\u003e is a \u003cstrong\u003e26-inch clockwise (CW) condenser fan propeller\u003c\/strong\u003e with a \u003cstrong\u003e1\/2-inch bore\u003c\/strong\u003e, the OEM replacement fan blade assembly for select \u003cstrong\u003eYork residential and light commercial outdoor condensing units\u003c\/strong\u003e sold under York's \u003cstrong\u003eSource 1\u003c\/strong\u003e parts line. The propeller mounts directly on the \u003cstrong\u003econdenser fan motor shaft\u003c\/strong\u003e and pulls outside air upward through the \u003cstrong\u003econdenser coil\u003c\/strong\u003e, carrying away the heat the \u003cstrong\u003ecompressor\u003c\/strong\u003e and refrigerant circuit have to reject. The photo shows broad, smoothly curved \u003cstrong\u003ealuminum\u003c\/strong\u003e blades attached to a stamped \u003cstrong\u003egalvanized steel hub\u003c\/strong\u003e with a center bore and a pattern of mounting holes — the same construction York uses on its factory fan blades.\u003c\/p\u003e\n\n\u003cp\u003ePropellers are not one-size-fits-all. York lists its fan blades by \u003cstrong\u003ediameter\u003c\/strong\u003e, \u003cstrong\u003erotation\u003c\/strong\u003e, \u003cstrong\u003ebore\u003c\/strong\u003e and \u003cstrong\u003eblade pitch\u003c\/strong\u003e, and nearby numbers such as \u003cstrong\u003eS1-026-47794-000\u003c\/strong\u003e (another \u003cstrong\u003e26-inch CW, 1\/2-inch bore\u003c\/strong\u003e York propeller) are separate parts that may differ in pitch or blade count. A propeller with the wrong rotation moves little air, and the wrong pitch can overload or underload the motor. Match the \u003cstrong\u003ediameter\u003c\/strong\u003e, the \u003cstrong\u003eclockwise rotation\u003c\/strong\u003e and the \u003cstrong\u003e1\/2-inch bore\u003c\/strong\u003e to the blade you are replacing, and confirm your motor's rotation before you order. When the old blade is still on the unit, the \u003cstrong\u003epart number stamped on the hub or blade\u003c\/strong\u003e is the best way to confirm \u003cstrong\u003eS1-026-47782-000\u003c\/strong\u003e is the right number.\u003c\/p\u003e\n\n\u003cp\u003eReplace the propeller when a blade is \u003cstrong\u003ecracked\u003c\/strong\u003e, \u003cstrong\u003ebent\u003c\/strong\u003e, \u003cstrong\u003ecorroded\u003c\/strong\u003e or chipped, when the unit shakes from an \u003cstrong\u003eout-of-balance blade\u003c\/strong\u003e, when the hub bore is \u003cstrong\u003eworn\u003c\/strong\u003e and the blade wobbles on the shaft, or when the blade \u003cstrong\u003erubs the fan orifice\u003c\/strong\u003e. Restricted airflow shows up as \u003cstrong\u003ehigh head pressure\u003c\/strong\u003e, a warm \u003cstrong\u003econdenser coil\u003c\/strong\u003e and \u003cstrong\u003ecompressor short-cycling\u003c\/strong\u003e on hot days. To install, open and lock out the \u003cstrong\u003edisconnect\u003c\/strong\u003e, remove the \u003cstrong\u003efan guard\u003c\/strong\u003e, loosen the \u003cstrong\u003ehub set screw\u003c\/strong\u003e and slide the old blade off. Clean the \u003cstrong\u003emotor shaft\u003c\/strong\u003e, check it for rust or scoring, and set the new propeller to the \u003cstrong\u003esame depth in the fan orifice\u003c\/strong\u003e as the original before tightening the set screw onto the shaft flat. Spin the blade by hand to confirm even clearance, and replace the \u003cstrong\u003econdenser fan motor\u003c\/strong\u003e too if the shaft bearings are loose.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOEM Fit and Finish:\u003c\/strong\u003e Genuine \u003cstrong\u003eYork Source 1\u003c\/strong\u003e propeller with the factory \u003cstrong\u003ealuminum blade\u003c\/strong\u003e and \u003cstrong\u003egalvanized hub\u003c\/strong\u003e construction.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRestores Condenser Airflow:\u003c\/strong\u003e A straight, balanced \u003cstrong\u003e26-inch\u003c\/strong\u003e blade brings \u003cstrong\u003ehead pressure\u003c\/strong\u003e, \u003cstrong\u003eamp draw\u003c\/strong\u003e and \u003cstrong\u003ecoil temperature\u003c\/strong\u003e back to normal operation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQuieter, Smoother Running:\u003c\/strong\u003e Replacing a bent or cracked blade removes the \u003cstrong\u003evibration\u003c\/strong\u003e and \u003cstrong\u003efan noise\u003c\/strong\u003e that wear out \u003cstrong\u003emotor bearings\u003c\/strong\u003e early.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClear Specifications:\u003c\/strong\u003e \u003cstrong\u003e26-inch\u003c\/strong\u003e, \u003cstrong\u003eCW rotation\u003c\/strong\u003e, \u003cstrong\u003e1\/2-inch bore\u003c\/strong\u003e — the three numbers you need to match against your old blade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhat size and rotation is this propeller?\u003c\/strong\u003e The \u003cstrong\u003eYork S1-026-47782-000\u003c\/strong\u003e is a \u003cstrong\u003e26-inch\u003c\/strong\u003e, \u003cstrong\u003eclockwise\u003c\/strong\u003e propeller with a \u003cstrong\u003e1\/2-inch bore\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIs it the same as S1-026-47794-000?\u003c\/strong\u003e Both are listed as \u003cstrong\u003e26-inch CW, 1\/2-inch bore\u003c\/strong\u003e York propellers, but they are separate numbers; compare \u003cstrong\u003eblade pitch\u003c\/strong\u003e, \u003cstrong\u003eblade count\u003c\/strong\u003e and the number stamped on your old blade.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDo I need to replace the motor too?\u003c\/strong\u003e Not necessarily. Check the \u003cstrong\u003emotor shaft\u003c\/strong\u003e and \u003cstrong\u003ebearings\u003c\/strong\u003e for play, rust or noise; if they are sound, the propeller can be replaced on its own.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDisclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.\u003c\/p\u003e","brand":"York","offers":[{"title":"Default Title","offer_id":67659134435506,"sku":"S1-026-47782-000","price":325.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1838\/2375\/files\/S1-026-47782-000.jpg?v=1791482265","url":"https:\/\/www.gsistore.com\/en-ca\/products\/york-s1-026-47782-000","provider":"GSIstore","version":"1.0","type":"link"}