{"product_id":"burnham-boiler-109628-01","title":"Burnham Boiler 109628-01 SS Burner Kit","description":"\u003cp\u003eThe \u003cstrong\u003eBurnham Boiler 109628-01 SS Main Burner Kit\u003c\/strong\u003e is the \u003cstrong\u003eOEM\u003c\/strong\u003e set of three \u003cstrong\u003estainless steel\u003c\/strong\u003e main burner tubes for a \u003cstrong\u003eBurnham\u003c\/strong\u003e gas-fired boiler. Each tube is a straight, slotted \u003cstrong\u003eburner tube\u003c\/strong\u003e that receives gas from the \u003cstrong\u003emanifold\u003c\/strong\u003e and orifices, draws in combustion air, and spreads the mixture along its length so it burns as a steady row of small blue flames beneath the \u003cstrong\u003eheat exchanger\u003c\/strong\u003e. \u003cstrong\u003eStainless steel\u003c\/strong\u003e construction resists the scaling and corrosion that eventually wear out ordinary steel tubes. Three tubes in a single kit suit a boiler whose burner bank uses three tubes, so count the burners in the unit first.\u003c\/p\u003e\n\n\u003cp\u003eBurner tubes fail slowly. Rust flakes can clog the \u003cstrong\u003eburner ports\u003c\/strong\u003e, a warped or cracked tube produces uneven \u003cstrong\u003eflame pattern\u003c\/strong\u003e and \u003cstrong\u003eflame lift\u003c\/strong\u003e, and a partly blocked tube can cause \u003cstrong\u003edelayed ignition\u003c\/strong\u003e or \u003cstrong\u003eflame rollout\u003c\/strong\u003e. Technicians usually see yellow tips, lazy flames, soot on the \u003cstrong\u003eheat exchanger\u003c\/strong\u003e, or a boiler that lights roughly and trips on a \u003cstrong\u003erollout switch\u003c\/strong\u003e. Replacing the burner tubes as a set brings the flame back to an even, blue pattern across the whole \u003cstrong\u003eburner bank\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e109628-01\u003c\/strong\u003e supplies three tubes in one kit. Shut off the \u003cstrong\u003egas supply\u003c\/strong\u003e and power, compare the tube count, length and port layout against the burners in the boiler before ordering, and install the tubes square in their \u003cstrong\u003eretaining slots\u003c\/strong\u003e so the orifices line up cleanly with each tube inlet. After the job, light the boiler, verify a clean blue \u003cstrong\u003eflame pattern\u003c\/strong\u003e, check the \u003cstrong\u003emanifold pressure\u003c\/strong\u003e, and run a \u003cstrong\u003ecombustion test\u003c\/strong\u003e before leaving. Replace all three tubes together instead of one at a time: tubes in a bank age at the same rate, and mixing new and old \u003cstrong\u003eburner tubes\u003c\/strong\u003e leaves uneven \u003cstrong\u003eflame patterns\u003c\/strong\u003e and invites repeat service. Clean the \u003cstrong\u003eorifices\u003c\/strong\u003e, vacuum the \u003cstrong\u003eburner compartment\u003c\/strong\u003e and check the \u003cstrong\u003eignitor\u003c\/strong\u003e position while the tubes are out, and inspect the \u003cstrong\u003eheat exchanger\u003c\/strong\u003e surfaces for soot that signals earlier poor combustion.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThree Tubes in One Kit:\u003c\/strong\u003e The kit supplies three \u003cstrong\u003eburner tubes\u003c\/strong\u003e so a bank can be renewed together with a single part number.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStainless Steel:\u003c\/strong\u003e \u003cstrong\u003eStainless steel\u003c\/strong\u003e resists the scale and corrosion that clog \u003cstrong\u003eburner ports\u003c\/strong\u003e on older tubes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEven Flame Pattern:\u003c\/strong\u003e New tubes restore a uniform row of blue flames and reduce \u003cstrong\u003eflame lift\u003c\/strong\u003e and \u003cstrong\u003edelayed ignition\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOEM Part Number:\u003c\/strong\u003e Supplied under \u003cstrong\u003eBurnham\u003c\/strong\u003e number \u003cstrong\u003e109628-01\u003c\/strong\u003e so the tubes match the factory design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHow many tubes are in the kit?:\u003c\/strong\u003e Three \u003cstrong\u003estainless steel\u003c\/strong\u003e \u003cstrong\u003eburner tubes\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhat signs say burner tubes need replacing?:\u003c\/strong\u003e Yellow flame tips, an uneven \u003cstrong\u003eflame pattern\u003c\/strong\u003e, soot on the \u003cstrong\u003eheat exchanger\u003c\/strong\u003e, or rough lighting are common signs.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHow do I confirm it matches my boiler?:\u003c\/strong\u003e Compare the tube count, length and port layout with the burners installed, and contact our team with the boiler model if you are unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDisclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.\u003c\/p\u003e","brand":"Burnham Boiler","offers":[{"title":"Default Title","offer_id":68111253078194,"sku":"109628-01","price":59.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1838\/2375\/files\/109628-01.jpg?v=1795219412","url":"https:\/\/www.gsistore.com\/products\/burnham-boiler-109628-01","provider":"GSIstore","version":"1.0","type":"link"}