{"product_id":"weil-mclain-381-359-295","title":"Weil McLain 381-359-295 Inducer Kit","description":"\u003cp\u003eThe \u003cstrong\u003eWeil McLain 381-359-295\u003c\/strong\u003e is the \u003cstrong\u003einducer kit\u003c\/strong\u003e for \u003cstrong\u003eCGi Series 4\u003c\/strong\u003e boilers in \u003cstrong\u003esizes 4 through 6\u003c\/strong\u003e. The \u003cstrong\u003einducer\u003c\/strong\u003e is the \u003cstrong\u003edraft motor and fan\u003c\/strong\u003e that pulls \u003cstrong\u003ecombustion air\u003c\/strong\u003e through the \u003cstrong\u003eburner\u003c\/strong\u003e and \u003cstrong\u003eheat exchanger\u003c\/strong\u003e and drives the \u003cstrong\u003eflue gases\u003c\/strong\u003e out the \u003cstrong\u003event\u003c\/strong\u003e. When it wears out the symptoms are the ones a boiler tech knows well: \u003cstrong\u003ebearing noise\u003c\/strong\u003e, a boiler that will \u003cstrong\u003enot prove draft\u003c\/strong\u003e, and \u003cstrong\u003elockouts\u003c\/strong\u003e because the \u003cstrong\u003epressure switch\u003c\/strong\u003e is not seeing airflow.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e381-359-295\u003c\/strong\u003e supersedes \u003cstrong\u003e381-359-293\u003c\/strong\u003e. Weil-McLain's \u003cstrong\u003eCGi Series 4\u003c\/strong\u003e parts book lists the \u003cstrong\u003e381-359-293\u003c\/strong\u003e kit as an \u003cstrong\u003einducer fan assembly kit\u003c\/strong\u003e that includes the \u003cstrong\u003einducer fan assembly\u003c\/strong\u003e, \u003cstrong\u003egasket\u003c\/strong\u003e and \u003cstrong\u003enuts\u003c\/strong\u003e, for \u003cstrong\u003eCGi sizes 4 through 6\u003c\/strong\u003e. If your records, parts book, or old invoice call for \u003cstrong\u003e381-359-293\u003c\/strong\u003e, order \u003cstrong\u003e381-359-295\u003c\/strong\u003e. The inducer kits are size-specific across the line: \u003cstrong\u003e381-354-588\u003c\/strong\u003e is the kit for \u003cstrong\u003eCGi sizes 25 and 3\u003c\/strong\u003e and \u003cstrong\u003e381-359-294\u003c\/strong\u003e is the kit for \u003cstrong\u003eCGi sizes 7 and 8\u003c\/strong\u003e, so the number has to match the boiler. The inducer mounting gasket is also available on its own as \u003cstrong\u003e590-317-627\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eOn the job, shut off the \u003cstrong\u003egas\u003c\/strong\u003e and \u003cstrong\u003epower\u003c\/strong\u003e, and disconnect the inducer wiring only after labeling the leads. Inspect the \u003cstrong\u003event connection\u003c\/strong\u003e, \u003cstrong\u003econdensate path\u003c\/strong\u003e, and \u003cstrong\u003epressure switch tubing\u003c\/strong\u003e while the inducer is out — a blocked vent or a cracked tube can mimic a failed inducer. After the new kit is installed, confirm a clean \u003cstrong\u003edraft proof\u003c\/strong\u003e, check \u003cstrong\u003ecombustion\u003c\/strong\u003e, and verify the \u003cstrong\u003event system\u003c\/strong\u003e for leaks before the boiler goes back in service.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBoiler-Specific Fit:\u003c\/strong\u003e Specified for the \u003cstrong\u003eCGi Series 4\u003c\/strong\u003e in \u003cstrong\u003esizes 4–6\u003c\/strong\u003e, so you are not guessing across sizes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCurrent Replacement Number:\u003c\/strong\u003e \u003cstrong\u003e381-359-295\u003c\/strong\u003e is the active number that replaced \u003cstrong\u003e381-359-293\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRestores Draft:\u003c\/strong\u003e A new \u003cstrong\u003einducer\u003c\/strong\u003e brings back proper \u003cstrong\u003ecombustion-air flow\u003c\/strong\u003e and \u003cstrong\u003eventing\u003c\/strong\u003e on boilers that fail to prove draft or run noisy.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGenuine Weil McLain:\u003c\/strong\u003e A factory \u003cstrong\u003eWeil McLain\u003c\/strong\u003e kit matched to the original equipment rather than a generic inducer motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhich boilers does this fit?\u003c\/strong\u003e The \u003cstrong\u003eWeil McLain CGi Series 4\u003c\/strong\u003e in \u003cstrong\u003esizes 4 through 6\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eI have 381-359-293 written down. Is this the same part?\u003c\/strong\u003e \u003cstrong\u003e381-359-295\u003c\/strong\u003e replaced \u003cstrong\u003e381-359-293\u003c\/strong\u003e, so order \u003cstrong\u003e381-359-295\u003c\/strong\u003e for a \u003cstrong\u003eCGi Series 4\u003c\/strong\u003e, \u003cstrong\u003esizes 4–6\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhat if my CGi is a different size?\u003c\/strong\u003e The inducer kit changes with boiler size: \u003cstrong\u003e381-354-588\u003c\/strong\u003e covers \u003cstrong\u003eCGi sizes 25 and 3\u003c\/strong\u003e and \u003cstrong\u003e381-359-294\u003c\/strong\u003e covers \u003cstrong\u003eCGi 7 and 8\u003c\/strong\u003e. Match the kit to your boiler's size and series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDisclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.\u003c\/p\u003e","brand":"Weil McLain","offers":[{"title":"Default Title","offer_id":67637726347442,"sku":"381-359-295","price":417.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1838\/2375\/files\/ac-parts-1000x1000_d8f6c0df-eeb5-4a7f-8ee2-4f92681ea310.webp?v=1755632728","url":"https:\/\/www.gsistore.com\/products\/weil-mclain-381-359-295","provider":"GSIstore","version":"1.0","type":"link"}