{"product_id":"weil-mclain-382-200-430","title":"Weil McLain 382-200-430 Termination Kit","description":"\u003cp\u003eThe \u003cstrong\u003eWeil McLain 382-200-430 Intake\/Exhaust Termination Kit\u003c\/strong\u003e is the OEM \u003cstrong\u003esidewall vent\/air cap termination kit\u003c\/strong\u003e that finishes the outside-wall end of a \u003cstrong\u003edirect-vent\u003c\/strong\u003e installation on a \u003cstrong\u003eWeil-McLain condensing gas boiler\u003c\/strong\u003e. It is the termination kit for systems that run \u003cstrong\u003e3-inch AL29-4C stainless steel vent pipe\u003c\/strong\u003e together with \u003cstrong\u003e3-inch PVC air pipe\u003c\/strong\u003e, and it is the \u003cstrong\u003eAL29-4C\u003c\/strong\u003e kit used with the \u003cstrong\u003eECO Series\u003c\/strong\u003e boilers. It gives the exhaust and the combustion air intake one weather-protected, factory-engineered point of entry and exit through the \u003cstrong\u003eexterior wall\u003c\/strong\u003e. The kit contains the \u003cstrong\u003eblack plastic intake\/exhaust cap\u003c\/strong\u003e, the \u003cstrong\u003einside and outside cover plates\u003c\/strong\u003e (the \u003cstrong\u003emounting and backing plate\u003c\/strong\u003e pair), the \u003cstrong\u003emounting hardware\u003c\/strong\u003e and the \u003cstrong\u003einstallation instructions\u003c\/strong\u003e, so the wall penetration can be framed, sealed and finished with parts that were engineered to work together.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e382-200-430\u003c\/strong\u003e sits in a numbered family of \u003cstrong\u003eWeil-McLain\u003c\/strong\u003e termination kits, and the difference between the kits is the pipe material and the venting method. The \u003cstrong\u003e383-500-397\u003c\/strong\u003e is the \u003cstrong\u003esidewall vent\/air cap termination kit\u003c\/strong\u003e for \u003cstrong\u003ePVC vent and air pipes\u003c\/strong\u003e, while the \u003cstrong\u003e382-200-430\u003c\/strong\u003e is the version for \u003cstrong\u003eAL29-4C vent pipe and PVC air pipe\u003c\/strong\u003e. The \u003cstrong\u003e383-500-398\u003c\/strong\u003e is the \u003cstrong\u003e4-inch PVC\u003c\/strong\u003e sidewall kit, the \u003cstrong\u003e383-500-350\u003c\/strong\u003e is the \u003cstrong\u003e3-inch concentric vent termination kit\u003c\/strong\u003e, and the \u003cstrong\u003e383-500-778\u003c\/strong\u003e is the \u003cstrong\u003edirect exhaust venting kit\u003c\/strong\u003e with interior and exterior intake\/exhaust plates. The openings in the \u003cstrong\u003e382-200-430\u003c\/strong\u003e are sized for \u003cstrong\u003e3-inch\u003c\/strong\u003e pipe, so a system built with \u003cstrong\u003e2-inch\u003c\/strong\u003e vent and air pipe needs a field-installed \u003cstrong\u003e3 x 2 adapter\u003c\/strong\u003e at the termination. \u003cstrong\u003eBird screens\u003c\/strong\u003e are a separate part; the \u003cstrong\u003e383-500-105\u003c\/strong\u003e is the screen for \u003cstrong\u003e3-inch PVC vent and air pipes\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe termination is the part of a venting system that everyone sees and nobody inspects. A cracked or sun-faded cap, a cover plate that has pulled away from the siding, or a loose seal at the wall lets rain, insects and cold air into the wall opening, and a nest or an ice build-up across the intake shows up as a pressure switch lockout or a boiler that will not hold a burn. When a boiler is being re-vented, or a termination was damaged during a siding or window job, replacing the whole kit is cleaner than patching the old one. Set the \u003cstrong\u003ebacking plate\u003c\/strong\u003e square, seal the wall penetration the way the boiler manual describes, keep the cap clear of snow, grade, windows and other openings by the clearances in the venting section, and confirm the vent and air pipes are fully seated in the cap before the boiler is fired. Match the kit to the boiler by model and serial number.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFactory-Matched Termination:\u003c\/strong\u003e The \u003cstrong\u003ecap\u003c\/strong\u003e, \u003cstrong\u003ecover plates\u003c\/strong\u003e and \u003cstrong\u003ehardware\u003c\/strong\u003e are specified by \u003cstrong\u003eWeil-McLain\u003c\/strong\u003e for this vent configuration, so the wall opening, the pipe sizes and the cap all agree.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBuilt for AL29-4C Vent Systems:\u003c\/strong\u003e Sized for \u003cstrong\u003e3-inch AL29-4C stainless vent pipe\u003c\/strong\u003e with \u003cstrong\u003e3-inch PVC air pipe\u003c\/strong\u003e, the combination this kit is made for.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeather-Protected Wall Penetration:\u003c\/strong\u003e The \u003cstrong\u003einside and outside cover plates\u003c\/strong\u003e finish the \u003cstrong\u003eexterior wall\u003c\/strong\u003e opening on both faces and keep rain, wind and pests out of the penetration.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eComplete Kit:\u003c\/strong\u003e \u003cstrong\u003ePlastic cap\u003c\/strong\u003e, \u003cstrong\u003emounting and backing plate\u003c\/strong\u003e, \u003cstrong\u003ehardware\u003c\/strong\u003e and \u003cstrong\u003einstructions\u003c\/strong\u003e arrive together, so the install does not stall on a missing fastener.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhat pipe does the 382-200-430 terminate?\u003c\/strong\u003e \u003cstrong\u003e3-inch AL29-4C\u003c\/strong\u003e stainless vent pipe and \u003cstrong\u003e3-inch PVC\u003c\/strong\u003e air pipe. For an all-\u003cstrong\u003ePVC\u003c\/strong\u003e system the matching kit is the \u003cstrong\u003e383-500-397\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCan it be used with 2-inch pipe?\u003c\/strong\u003e Only with a field-installed \u003cstrong\u003e3 x 2 adapter\u003c\/strong\u003e, because the cap openings are sized for \u003cstrong\u003e3-inch\u003c\/strong\u003e pipe.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAre bird screens included?\u003c\/strong\u003e The kit contents are the \u003cstrong\u003ecap\u003c\/strong\u003e, \u003cstrong\u003ecover plates\u003c\/strong\u003e and \u003cstrong\u003emounting hardware\u003c\/strong\u003e. \u003cstrong\u003eBird screens\u003c\/strong\u003e are a separate part, such as the \u003cstrong\u003e383-500-105\u003c\/strong\u003e for \u003cstrong\u003e3-inch PVC\u003c\/strong\u003e vent and air pipes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDisclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.\u003c\/p\u003e","brand":"Weil McLain","offers":[{"title":"Default Title","offer_id":68096124092594,"sku":"382-200-430","price":337.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1838\/2375\/files\/382-200-430.jpg?v=1795112954","url":"https:\/\/www.gsistore.com\/products\/weil-mclain-382-200-430","provider":"GSIstore","version":"1.0","type":"link"}