{"product_id":"weil-mclain-560-742-859","title":"Weil McLain 560-742-859 Pilot Tube","description":"\u003cp\u003eThe \u003cstrong\u003eWeil McLain 560-742-859 Aluminum Pilot Tube\u003c\/strong\u003e is a short \u003cstrong\u003e1\/4 in. by 3 in.\u003c\/strong\u003e \u003cstrong\u003etube\u003c\/strong\u003e with a \u003cstrong\u003efactory-formed\u003c\/strong\u003e \u003cstrong\u003e90-degree bend\u003c\/strong\u003e. It is catalogued as a \"\u003cstrong\u003eTube Pilot 1\/4 x 3 90 Deg\u003c\/strong\u003e,\" and the photo shows a clean, bright \u003cstrong\u003ealuminum tube\u003c\/strong\u003e with an open end on each side of a smooth \u003cstrong\u003ebend\u003c\/strong\u003e, with no \u003cstrong\u003efittings\u003c\/strong\u003e, nuts or \u003cstrong\u003eferrules\u003c\/strong\u003e attached. Matching a short \u003cstrong\u003eformed tube\u003c\/strong\u003e by number is much easier than cutting and bending a length by hand.\u003c\/p\u003e\n\n\u003cp\u003eA \u003cstrong\u003eformed tube\u003c\/strong\u003e like this is used where a \u003cstrong\u003egas or sense line\u003c\/strong\u003e has to turn a tight corner in a small space, such as around a valve body or between two closely spaced connections. Hand-bending a short length of \u003cstrong\u003e1\/4 in. aluminum tube\u003c\/strong\u003e to a clean \u003cstrong\u003e90-degree\u003c\/strong\u003e angle is difficult, because it \u003cstrong\u003ekinks\u003c\/strong\u003e easily, and a \u003cstrong\u003ekinked\u003c\/strong\u003e or flattened \u003cstrong\u003etube\u003c\/strong\u003e restricts flow or leaks at a fitting. A \u003cstrong\u003efactory-formed\u003c\/strong\u003e \u003cstrong\u003ebend\u003c\/strong\u003e keeps the passage round and the ends square, which makes a \u003cstrong\u003egas-tight\u003c\/strong\u003e connection much easier.\u003c\/p\u003e\n\n\u003cp\u003eWhen you replace a \u003cstrong\u003etube\u003c\/strong\u003e, shut off the \u003cstrong\u003egas supply\u003c\/strong\u003e first and handle the new \u003cstrong\u003etube\u003c\/strong\u003e gently, because \u003cstrong\u003ealuminum\u003c\/strong\u003e \u003cstrong\u003ework-hardens\u003c\/strong\u003e and can crack if it is bent back and forth. Check both ends for \u003cstrong\u003eburrs\u003c\/strong\u003e, confirm the \u003cstrong\u003etube\u003c\/strong\u003e is the same \u003cstrong\u003e1\/4 in.\u003c\/strong\u003e diameter and the same overall run as the original, and tighten the \u003cstrong\u003efittings\u003c\/strong\u003e snugly without over-torquing. Leak-test every joint with an approved solution after the gas is back on. Do not reuse an old \u003cstrong\u003etube\u003c\/strong\u003e that has been \u003cstrong\u003ekinked\u003c\/strong\u003e, flattened or repeatedly bent. Compare the \u003cstrong\u003ebend\u003c\/strong\u003e angle and the \u003cstrong\u003e3 in.\u003c\/strong\u003e length to your original before you order, and confirm compatibility with your boiler.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFactory-Formed 90-Degree Bend:\u003c\/strong\u003e The \u003cstrong\u003ebend\u003c\/strong\u003e is already made, so the passage stays round and the ends stay square.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompact 1\/4 In. by 3 In. Size:\u003c\/strong\u003e A short run for tight spaces where a hand-bent \u003cstrong\u003etube\u003c\/strong\u003e would kink.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClean Aluminum Finish:\u003c\/strong\u003e Bare \u003cstrong\u003ealuminum tube\u003c\/strong\u003e with open ends, ready for your \u003cstrong\u003efittings\u003c\/strong\u003e.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCatalogued as a Pilot Tube:\u003c\/strong\u003e The catalog designation reads \u003cstrong\u003eTube Pilot\u003c\/strong\u003e, so match it by number to your original.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWhat size is the 560-742-859?\u003c\/strong\u003e \u003cstrong\u003e1\/4 in. by 3 in.\u003c\/strong\u003e with a \u003cstrong\u003e90-degree bend\u003c\/strong\u003e, as the catalog designation reads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDoes it include fittings?\u003c\/strong\u003e No. The photo shows the bare \u003cstrong\u003ealuminum tube\u003c\/strong\u003e. Supply your own \u003cstrong\u003efittings\u003c\/strong\u003e to match the original.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCan I bend my own instead?\u003c\/strong\u003e You can, but \u003cstrong\u003ealuminum tube\u003c\/strong\u003e \u003cstrong\u003ekinks\u003c\/strong\u003e easily at this size. The \u003cstrong\u003efactory-formed\u003c\/strong\u003e \u003cstrong\u003ebend\u003c\/strong\u003e keeps the passage open and the ends square.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nDisclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.","brand":"Weil McLain","offers":[{"title":"Default Title","offer_id":68025748816050,"sku":"560-742-859","price":12.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1838\/2375\/files\/560-742-859.jpg?v=1794598839","url":"https:\/\/www.gsistore.com\/products\/weil-mclain-560-742-859","provider":"GSIstore","version":"1.0","type":"link"}