ASCO 290411-001 Din Connector

The ASCO 290411-001 DIN Connector is a standard 18mm Form A spade plug designed for reliable electrical termination in industrial solenoid valve applications. Constructed from glass fiber reinforced polyamide, this non-lighted connector provides a rigid, high-impact housing suitable for demanding HVACR and process environments. It features an IP65 enclosure rating, ensuring protection against moisture entry and washdown when properly installed with the included nitrile butylene seal and securing screw. This 3-wire connector (2 pins plus common ground) supports voltage ratings up to 250 Volts and is 0-90 degree rotatable to accommodate tight plumbing configurations. The PG 11 cable gland accepts cable diameters from 0.24 to 0.4 inches, making it a versatile field-attachable solution for ASCO RedHat valves and other compliant DIN 43650/ISO 4400 interfaces. It is engineered for consistent electrical continuity and thermal stability across a temperature range of -40 to 125 degrees C.

Key Benefits

• Industrial Durability: Glass fiber reinforced housing resists chemical exposure and mechanical shock in harsh mechanical rooms.
• Environmentally Sealed: Achieves an IP65 rating to prevent short circuits caused by condensation or external fluid leaks.
• Flexible Installation: The 90-degree rotatable design allows for optimal cable routing in compact valve manifolds.
• Standardized Compatibility: Adheres to ISO 4400 and EN 175301-803 Form A standards for seamless integration with existing solenoid coils.
• Secure Termination: Features internal screw-type terminals and a PG 11 strain relief nut to prevent cable pull-out.

Common Questions

Is this connector compatible with LED status indicators?
No, the ASCO 290411-001 is a standard unlighted plug. If visual troubleshooting is required for your coil circuit, you would need a 290412 series connector with an integrated LED/VDR.

What is the maximum cable size for the PG 11 gland?
The PG 11 cable gland accommodates outer diameters between 0.24" and 0.40" (6mm to 10mm). Using cable outside of this range may compromise the IP65 seal.

Can this be used on non-ASCO valves?
Yes, provided the valve coil uses a standard 18mm Form A DIN 43650 interface. However, it is specifically optimized for ASCO solenoid valve specifications and dimensions.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.