Carrier HC41TE125 Blower Motor

The Carrier HC41TE125 Blower Motor is an OEM replacement motor designed for direct-drive blower applications in Carrier, Bryant, and Payne furnaces. This 1/3 HP blower motor operates on a 115V single-phase circuit, delivering a consistent 1075 RPM. As a Permanent Split Capacitor (PSC) motor, it utilizes a NEMA 48 frame (5-5/8 inch diameter) and is thermally protected to prevent winding failure during high-static conditions or over-amping. For technicians performing a field swap, verify that your run capacitor (typically 5 MFD/370V) is within spec, as a degraded capacitor is the leading cause of premature failure in these multi-speed motors.

Built with a rolled steel frame and an aluminum flange, this unit is engineered for long-term reliability in high-cycle HVAC environments. The shaft diameter is 1/2 inch with a 4.25-inch extension, making it compatible with standard blower wheels. It features Counter-Clockwise (CCW) rotation from the lead end, though many replacements provide reversible capability to match specific air handler configurations. When installing, always inspect the blower wheel for debris or imbalance that could cause vibration-induced bearing wear.

• Direct OEM Compatibility: Ensures a drop-in fit for Carrier, Bryant, and Payne equipment without the need for additional mounting brackets or motor modifications.
• Optimized Airflow Management: The 1075 RPM output is calibrated to maintain proper static pressure for efficient heat exchange and cooling cycles.
• Industrial-Grade Construction: Features Class B insulation and thermal overload protection to handle the high internal temperatures of furnace cabinets.
• Energy Efficient PSC Design: Provides a balance of starting torque and running efficiency for standard residential and light commercial air handlers.

What are the cross-reference numbers for this motor?
This motor is the primary Carrier HC41TE125 replacement and frequently crosses with Genteq model 5KCP39GGU316S and HC41TE125A.

Does this motor include the run capacitor?
No, this is the blower motor only. It is best practice to install a new capacitor when replacing the motor to ensure the PSC motor starts and runs under the correct electrical load.

Can this motor be used in 230V applications?
No, this is a 115V motor. Applying 230V power will cause immediate failure of the internal windings and potentially damage the furnace control board.

This item is not eligible for free shipping.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.