Amana-Goodman PCBBF301V007S Control Board

The Amana-Goodman PCBBF301V007S is a furnace control board — the integrated furnace control that takes the call for heat from the thermostat and runs the ignition sequence, inducer, and blower in the right order, watching the safety circuits as it goes. Goodman's repair parts list RP-A2346 lists the base PCBBF301V007 as the circuit board, furnace for every AD9S80 model: AD9S800403ANAA, AD9S800403AXAA, AD9S800603ANAA, AD9S800603AXAA, AD9S800804BXAA, AD9S800805CXAA and AD9S801005CXAA. Goodman usually adds an S suffix to the service-replacement version of a board, and PCBBF301V007S is that S version under the PCBBF301V007 base number.

The board itself tells you what it does. A two-digit LED display reports status and fault codes, so the first diagnostic step is reading the display and matching it to the service label on the furnace. The low-voltage screw terminal strip is marked W2, W/W1, R, G, C, Y/Y1 and Y2 for the thermostat, with additional DEHUM, TWIN and 24V HUM terminals, and the board carries relays, spade terminals and multi-pin harness connectors for the line-voltage and sensor connections. Match the plug layout on your old board to this one before you power it up.

Do not condemn a control board before you prove the circuit around it. Verify 120 VAC at the furnace and 24 VAC from R to C, check the board fuse, and confirm a good furnace ground. Then look at the flame sensor, pressure switches, limit switches and inducer that feed the board's inputs, because a bad input produces the same fault code a bad board does. If the board is the problem, disconnect power, photograph the wiring, and swap connectors one at a time.

Key Benefits

• Two-Digit Diagnostic Display: On-board LED display shows status and fault codes, so you read the board's story before you touch a meter.
• Full Thermostat Terminal Set: W2, W/W1, R, G, C, Y/Y1, Y2 plus DEHUM, TWIN and 24V HUM terminals for the common hookups.
• Amana-Goodman Specific: A brand-specific Amana-Goodman board listed for the AD9S80 family, not a universal replacement that needs a jumper chart.
• Ready to Ship: Stocked and ready to go, which beats waiting on a furnace control board while a customer sits in a cold house.

Common Questions

• What furnace does this fit? Goodman's RP-A2346 parts list shows the PCBBF301V007 board on the AD9S80 models (AD9S800403ANAA through AD9S801005CXAA). Verify your furnace's model and serial number before ordering PCBBF301V007S.
• What does the S at the end mean? PCBBF301V007S is the S version of the PCBBF301V007 base number, the way Goodman typically designates a service-replacement board.
• How do I read the display? The two-digit LED flashes status and fault codes. Check the furnace's service label or wiring diagram for the code chart for your model.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.