Beckett Igniter 7505B1500U Control

The Beckett 7505B1500U GeniSys oil burner control is engineered for dependable primary safety in residential oil burner control and light commercial oil-fired applications, including boilers, furnaces, and water heaters. This 120V oil primary safety control precisely manages the burner motor, igniter, and optional solenoid valve, ensuring efficient operation. It features a 15-second pre-purge and 0-second post-purge timing, with interrupted ignition and a rapid 15-second lockout for enhanced system integrity. Compatible with the Beckett GeniSys CAD Cell Flame Detector Kit 7006U, this unit offers front-mounted 24 VAC thermostat terminals, accommodating both mechanical and power-stealing thermostats. It directly replaces older R7184B relay controls, providing an advanced upgrade. The control stores data for the last 15 burner cycles, aiding in diagnostics, and is programmable via the Beckett GeniSys 52082 Contractor Tool or BeckettLink Pro 7652 for customized pre-purge and post-purge settings. For installations in high-moisture environments, consider the Beckett GeniSys 7575 potted version.

• Key Benefits:
• Direct replacement for R7184B controls, simplifying upgrades.
• Advanced diagnostics with storage for the last 15 burner cycles.
• Programmable pre-purge and post-purge timings for optimized combustion.
• Compatible with standard 24 VAC thermostats, enhancing system integration.
• Robust safety features including 15-second interrupted ignition lockout.
• Designed for 120 VAC oil-fired boilers, furnaces, and water heaters.

Common Questions:

• My Beckett 7505B1500U is locking out, what should I check?

First, verify the CAD cell flame sensor is clean and properly positioned. Check for adequate fuel supply and ensure the burner electrodes and nozzle are in good condition. A restricted lockout (three consecutive lockouts) requires holding the reset button for 15 seconds to clear. If issues persist, inspect wiring and consult the control manual for detailed troubleshooting steps.

• Can I replace my old R7184B with a Beckett 7505B1500U?

Yes, the Beckett 7505B1500U is a direct replacement for the R7184B relay controls. Ensure all wiring connections are correctly transferred according to the appliance manufacturer's instructions and local codes.

• How do I prime the oil pump using the Beckett GeniSys 7505 control?

Initiate a call for heat. Once the burner starts, press and hold the reset button for 15 seconds until the yellow light illuminates, then release. The burner will restart. Immediately click the reset button again while the igniter is active to enter Pump Prime mode. Bleed the pump until all air is purged. Hold the reset button or remove the call for heat to exit Pump Prime mode.

This item is not eligible for free shipping.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.