Burnham 107866-01 Blower/Gas Valve Assembly 120/150

Burnham 107866-01 Gas Valve Assembly

Burnham Boiler

  • $991.00


The Burnham 107866-01 Blower/Gas Valve Assembly is the OEM combination blower and gas valve assembly for Burnham 120 and 150 size boilers. It joins the draft inducer blower and the gas valve into one factory-matched assembly, which is why it is replaced as a unit. The blower moves combustion air through the burner and heat exchanger, the gas valve meters fuel into that airflow, and the two together set the air-to-fuel ratio that determines how clean, stable and efficient the flame is. Because the pair is matched at the factory, there is no need to source and pair a blower and a gas valve separately.

Burnham builds this assembly by boiler size. The 107866-01 is the 120/150 assembly, the 107869-01 is the 080/100 assembly and the 107867-01 is the 180 assembly, so the size on the boiler's rating plate decides which number is correct. Gas valves are fuel specific, so confirm the boiler's gas type along with its size, and order by model and serial number rather than by size alone. A wrong assembly means wrong airflow and gas flow, which shows up as poor combustion readings, rough ignition or a boiler that will not hold a stable flame.

The signs of a failing assembly include a blower that runs noisy or rough, a flame that is unstable or lazy, ignition failures, combustion readings that cannot be brought into range, and a gas valve that does not open or that leaks by. Before replacing it, confirm the gas supply pressure, the vent and combustion air intake, the condensate drain and the wiring plugs. Gas work belongs to a qualified technician: shut off the gas and power, disconnect the gas connection, remove the old assembly, install the 107866-01, reconnect the plugs, restore the gas, leak-test every joint with an approved method and verify combustion with an analyzer before leaving the boiler in service.

Key Benefits

  • Matched Blower and Valve: The blower and gas valve come as one factory-matched assembly, so the air-to-fuel ratio starts from the original design.
  • Sized for 120 and 150: The 107866-01 is the assembly for Burnham 120/150 size boilers, with sister numbers 107869-01 for 080/100 and 107867-01 for 180.
  • Restores Stable Combustion: A new assembly restores steady combustion air delivery and accurate gas flow control.
  • Genuine OEM: A factory Burnham assembly built to the original specification.

Common Questions

  • What boiler sizes use the 107866-01? Burnham 120 and 150 size boilers. The 107869-01 is for 080/100 and the 107867-01 is for 180.
  • Why is the blower sold with the gas valve? The two work together to set the air-to-fuel ratio, so Burnham supplies them as one matched blower/gas valve assembly.
  • Does gas type matter? Yes. Gas valves are fuel specific, so confirm natural gas or propane along with the boiler size and order by model and serial number.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.