Carrier 30RB660004 Heater

The Carrier 30RB660004 Crankcase Heater is a factory-authorized OEM component specifically engineered for Carrier 30RB scroll compressor chillers. As a veteran technician knows, maintaining proper oil temperature during the off-cycle is non-negotiable for system longevity. This heater effectively targets refrigerant migration, ensuring that refrigerant does not mix with the oil when the ambient temperature drops. By keeping the crankcase oil above the saturation point, the 30RB660004 prevents liquid slugging and ensures adequate compressor lubrication upon startup. Designed as a direct-fit replacement, this crankcase heater kit includes the necessary insulation wrap and mounting clips to secure it approximately 2 inches above the compressor mounting plate. Operating on 50/60 Hz frequency, this CSA-listed part is built to withstand the thermal expansion and contraction cycles common in commercial HVACR environments, reducing the risk of tripped breakers or blown fuses caused by grounded heating elements.

Key Benefits:

• Prevents Refrigerant Migration: Stops liquid refrigerant from condensing in the oil during idle periods, protecting against flooded starts.
• Preserves Oil Viscosity: Maintains optimal lubricant temperature to ensure the scroll sets are protected from the first rotation.
• OEM Precision: Guaranteed compatibility with 30RB-series chiller compressors, eliminating the need for field modifications.
• Rugged Construction: Built to meet strict Carrier Corporation specifications for high-duty cycle industrial applications.
• Efficient Heat Transfer: Includes a dedicated insulation wrap to maximize thermal delivery to the crankcase while minimizing energy waste.

Common Questions:

How do I verify the heater is functioning?
Check for 120V or 240V (depending on your specific 30RB configuration) across the heater leads when the compressor contactor is de-energized. You should also verify an amperage draw with a clamp meter to ensure the element isn't open.

Where exactly should the 30RB660004 be installed?
The heater should be wrapped around the compressor base below the oil level, typically positioned about 2 inches above the mounting plate and secured with the provided fastening clip.

Will this prevent oil foaming?
Yes. By keeping the oil warm, it prevents the rapid boil-off of refrigerant during startup, which is the primary cause of oil foaming and subsequent mechanical wear.

This item is not eligible for free shipping.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.