The Carrier 326627-754 Inducer Housing is a critical OEM replacement component designed to maintain the structural integrity of the combustion blower assembly in high-efficiency Carrier, Bryant, and Payne furnaces. Built to withstand the harsh, corrosive environment of condensing furnace exhaust, this housing ensures a precise seal for the inducer motor and impeller wheel, facilitating the proper negative pressure required to clear the heat exchanger and engage the pressure switch. As a veteran-grade HVAC replacement part, it addresses common points of failure such as cracked plastic, heat-induced warping, and internal debris buildup that can cause rotational imbalance or venting issues. Replacing a compromised housing is essential for restoring optimal furnace airflow and preventing safety lockouts related to poor draft induction. This direct-fit inducer housing kit is engineered for a seamless fit on 58MCB and 58MCB series units, effectively housing the motor and fan to protect internal mechanical specs from moisture and combustion byproducts.

Item is Non Cancelable / Non Returnable

Key Benefits

• Precision OEM Fit: Ensures an airtight seal for the induced draft motor, critical for maintaining the correct W.C. (Water Column) pressure readings.
• Corrosion-Resistant Construction: Specifically designed to handle the acidic condensate common in 90% AFUE furnaces.
• System Reliability: Eliminates vibration-induced noise and motor binding by providing a perfectly aligned mounting surface for the 326627-754 assembly.
• Optimized Combustion: Restores the factory-spec purge cycle, ensuring clean ignition and high operational efficiency.

Common Questions

Is this housing compatible with my specific furnace model?
This Carrier 326627-754 is designed for a variety of condensing units including the 58MCB. To ensure exact compatibility, always cross-reference the part number found on your existing inducer assembly or consult your unit's master parts list.

Does this kit include the inducer motor or gaskets?
This part number refers specifically to the inducer housing. While some kits may include mounting hardware, it is standard practice to inspect and replace the inducer gasket or apply high-temperature RTV silicone during installation to prevent exhaust leaks.

Why is my furnace giving a pressure switch error even with a new motor?
A cracked or warped inducer housing can prevent the system from reaching the negative pressure threshold. Replacing a damaged housing is often the professional solution for persistent draft pressure faults when the motor itself is functional.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.