Weil McLain 590-317-631 Red Silicone Tubing 1/8 In. ID x 12 In.

Carrier HC44ME738 Motor

Carrier

  • $985.00


The Carrier HC44ME738 Motor is an OEM Carrier replacement motor from the HC44 motor series, the numbering distributors use for factory blower motors and condenser fan motors on Carrier HVAC equipment. The HC44ME738 is the exact part number Carrier assigns to this motor, which matters because motors in this series are not interchangeable by size alone. Other HC44 numbers are listed with 208-230 V, 460 V and 575 V ratings, in 1/2 HP and 1 HP sizes, with speed ratings that run up to about 1580 RPM and a stated rotation direction on the nameplate. Every one of those details has to line up with the original, so the part number is the starting point and the nameplate on the failed motor is the final check.

Before ordering, read the nameplate on the motor you are replacing and match the voltage, phase, horsepower, RPM, rotation, frame size and shaft diameter, along with the mounting style and lead arrangement. A motor that is close but not correct can overheat, run in the wrong direction, move the wrong amount of air or simply fail to bolt in. If the nameplate has worn off, the Carrier unit model and serial number will lead back to the correct motor number. Confirm the HC44ME738 against the unit model and serial number before you buy.

Motors rarely fail without a warning. Bearing noise, a motor that is hot to the touch, a shaft that does not spin freely by hand, a tripped thermal overload or a unit that hums without turning are the usual signs. Before condemning the motor, check the run capacitor if the motor uses one, confirm the supply voltage at the motor leads, and look for a seized blower wheel or fan blade that is dragging the motor down. A megohm test from the windings to the motor frame will show a grounded winding. If the motor checks bad, replace it with the matching OEM part, set the shaft position and blower wheel or fan alignment as the original had them, and tighten the mount so vibration does not wear the new bearings early.

Key Benefits

  • Exact OEM Part Number: The HC44ME738 is the number Carrier assigns to this motor, so you order by part number instead of guessing from frame size.
  • Part of the HC44 Series: The HC44 numbering covers Carrier blower and condenser fan motors, which keeps this motor in the factory family for the equipment.
  • Nameplate-Matched Replacement: Match voltage, HP, RPM and rotation to the original nameplate and the motor goes back into service as designed.
  • Verify Before You Buy: Confirm the HC44ME738 against the original nameplate and the unit model and serial number before you order.

Common Questions

  • What is the Carrier HC44ME738? It is an OEM Carrier motor in the HC44 series, used as a factory replacement blower motor or fan motor on Carrier HVAC equipment. Confirm the details on the nameplate of the motor you are replacing.
  • What should I match before ordering this motor? Match voltage, phase, HP, RPM, rotation, frame size, shaft diameter and the mounting and lead arrangement against the original nameplate.
  • Should I replace the capacitor with the motor? If the motor runs with a run capacitor, test it first and replace it when it is weak or out of tolerance, because a bad capacitor can shorten the life of a new motor.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.