Copeland 529-0060-25 Power Cable

The Copeland 529-0060-25 Power Cable with Molded Plug is the OEM compressor power lead that carries line voltage from your contactor to the compressor terminal block. It uses a black molded three-socket plug that seats directly onto the compressor terminal pins, with red, black and yellow conductors (bundled with cable ties) running out to stripped ends that land at the contactor or electrical box. Copeland's X-Line service parts listings carry 529-0060-25 for the XFAL low-temperature (2-6 HP) and XFAM medium-temperature compressor series, for example XFAL-020Z-TFC-081, alongside the 529-0060-04 power cable.

The molded plug is the weak point of any compressor power circuit. A loose contact, a pitted contactor or a damaged lead builds heat at the plug, and that heat shows up as discolored or brittle insulation, a melted plug body, a burnt smell at the terminal block, a compressor that hums and trips the protector, or intermittent starting. Do not splice a heat-damaged plug; replace the whole power cable assembly and inspect the compressor terminal pins and contactor for pitting while the lead is off. Copeland uses several dash numbers in this family, including 529-0060-04, 529-0060-05 and 529-0060-24. Each is its own part number, so match the number on your original cable rather than assuming they interchange.

Key Benefits

• OEM Copeland Lead: Built to Copeland's own specification for the X-Line XFAL / XFAM compressor series, not a generic universal pigtail.
• Plug-In Compressor End: The molded three-socket plug seats onto the terminal pins in one motion; you only land the three stripped leads at the contactor.
• Insulated, Sealed Connection: The molded plug body covers and insulates the terminal pins, keeping moisture and debris off the connection.
• Clean Fix for Heat Damage: Replaces a burnt or melted plug and its conductors as a unit, so you are not chasing a bad splice later.

Common Questions

• What does this cable fit? Copeland lists 529-0060-25 for the XFAL low-temperature (2-6 HP) and XFAM medium-temperature compressor series, for example XFAL-020Z-TFC-081. Confirm against the part number on your original lead or your compressor parts list.
• How do I know I need the -25 and not another dash number? Check the number on the original cable. 529-0060-04, 529-0060-05 and 529-0060-24 are separate Copeland parts; order the exact dash number you are replacing.
• Can I just repair a melted plug? No. Heat damage means the contact surfaces and conductor insulation are compromised. Replace the full power cable with molded plug and check the contactor and terminal pins for the cause of the heat.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.