White-Rodgers F92-1003 Adapter kit

The White-Rodgers F92-1003 is a purpose-built 36G gas valve adapter kit designed to provide technicians with a reliable solution for manifold pressure calibration. Specifically engineered for the 36G and 36J gas valve series, this kit is essential for interfacing standard manometer equipment with the specialized pressure bosses found on these controls. The 36G valve pressure check kit removes the guesswork from field setup by providing high-tolerance fittings that prevent leaks during critical gas valve manifold pressure adjustment. Each kit includes a specialized 5/16 inch tube that securely seats over the valve's integrated pressure boss, a 3/32 inch hex wrench for port screw manipulation, and a barbed connector to transition between 5/16 inch and 1/4 inch tubing. This furnace gas valve pressure testing accessory is vital for ensuring accurate gas flow management and proper system staging during commissioning or troubleshooting of high-efficiency residential and light commercial equipment.

• Optimized Compatibility: Explicitly designed for White-Rodgers 36G and 36J series valves, ensuring a leak-free seal on the tap boss.
• Field-Ready Components: Includes the 3/32" allen wrench needed to loosen the internal hex screw within the tube protrusion.
• Seamless Adaptation: The 5/16” to 1/4” hose barb connector allows for instant integration with standard commercial manometers and testing tools.
• Reliable Calibration: Facilitates high-accuracy outlet pressure readings to verify burner manifold PSI against manufacturer specifications.

Is this kit required for all White-Rodgers gas valves?
No, this is specifically required for the 36G and 36J series which utilize a hex screw tap inside a tube protrusion rather than a standard 1/8" NPT thread.

Can I use this for both inlet and outlet pressure testing?
Yes, the F92-1003 works on both the inlet and outlet pressure tap bosses of the 36G series gas valves.

What is the torque spec for the pressure tap screw after testing?
The internal hex screw should be tightened to a minimum of 13 in-lbs once the manometer and hose are removed to ensure a gas-tight seal.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.