Hankison HPRB7-A Air Dryer

Hankison HPRB7-A Air Dryer

Hankison

  • $1,938.00


The SPX Flow-Hankison HPRB7-A refrigerated air dryer is designed to remove moisture from compressed-air systems with airflow requirements up to 7 SCFM. Operating on a 115V single-phase electrical supply, this compact dryer is suited for appropriately sized air compressors serving workshops, maintenance facilities, pneumatic equipment, and industrial compressed-air applications.

The Hankison HPRB7-A compressed air dryer uses refrigeration to cool incoming compressed air, allowing water vapor to condense and separate from the air stream. Removing condensed moisture helps reduce water accumulation in downstream piping, air tools, regulators, and pneumatic components.

As a refrigerated compressed air dryer, it is intended for applications requiring controlled moisture removal rather than the extremely low dew points associated with desiccant dryers.

When selecting this 7 SCFM air compressor dryer, technicians should verify compressor output, operating pressure, inlet-air temperature, ambient conditions, electrical requirements, and piping connections. Actual drying capacity depends on the installation conditions. Proper sizing and condensate drainage are essential for dependable compressed-air system operation.

Key Benefits

  • Manufacturer: SPX Flow – Hankison

  • Part Number: HPRB7-A

  • Product Type: Refrigerated compressed-air dryer

  • Dryer Operation: Non-cycling refrigerated

  • Airflow Capacity: 7 SCFM nominal

  • Electrical Supply: 115V AC

  • Phase: Single-phase

  • Frequency: 60 Hz

  • Power Consumption: Approximately 0.15 kW

  • Refrigerant: R513A

  • Rated Pressure Dew Point: 50°F (10°C)

  • Air Inlet and Outlet: 3/8-inch male NPT

  • Maximum Inlet Air Pressure: 200 PSIG

  • Maximum Inlet Air Temperature: 120°F (48°C)

  • Ambient Operating Temperature: 40°F to 110°F (4°C to 43°C)

  • Dimensions: 12.6 inches wide × 12.6 inches deep × 15.3 inches high

  • Weight: Approximately 45 lb

  • Condensate Drain: Pneumatic float drain

  • Rated Flow Conditions: 100 PSIG inlet pressure, 100°F inlet air temperature, and 100°F ambient temperature

  • Drying Technology: Refrigeration-based moisture removal

  • Moisture Management: Condenses and separates water vapor from compressed air

  • System Protection: Helps reduce liquid-water carryover into downstream pneumatic equipment

  • Compact Application: Suitable for appropriately sized compressed-air installations

  • Equipment Compatibility: Verify compressor capacity, operating pressure, connection sizes, and inlet conditions

  • Installation: Provide appropriate ventilation, condensate drainage, and electrical connections according to manufacturer instructions

Common Questions

Q: What size air compressor can be used with the Hankison HPRB7-A?

A: The HPRB7-A has a nominal airflow rating of 7 SCFM. The compressor's actual delivered airflow must be evaluated against the dryer's capacity at the intended inlet temperature, operating pressure, and ambient conditions.

A compressor's horsepower rating alone is not sufficient for sizing.

Q: How does the SPX Flow-Hankison HPRB7-A remove moisture from compressed air?

A: The dryer cools compressed air through a refrigeration circuit, causing water vapor to condense. The condensed moisture is then separated and discharged through the condensate drainage system. This reduces liquid-water carryover into downstream equipment.

Q: Is the Hankison HPRB7-A suitable for applications requiring extremely dry compressed air?

A: The HPRB7-A is a refrigerated air dryer intended for general compressed-air moisture control, with a rated pressure dew point of approximately 50°F (10°C).

Applications requiring substantially lower pressure dew points, such as certain instrumentation or specialized industrial processes, may require desiccant drying equipment instead.

Disclaimer

While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.

HPRB7-A is the cross for HPR5-10

This item is not eligible for free shipping.