Setra 26410R5WD2DA1E Pressure Transducer

Setra 26410R5WD2DA1E Pressure Transducer

Setra

  • $447.00


The Setra 26410R5WD2DA1E Differential Pressure Transducer is a precision low-pressure sensor designed for HVAC monitoring, building automation, and air-handling system applications. Part of the Setra Model 264 Series, this transmitter measures differential pressure across a 0–0.5 inches water column (in. w.c.) range and provides a 0–5 VDC analog output for compatible control systems.

Featuring ±0.4% full-scale accuracy, the Setra 264 pressure transducer supports accurate measurement of low differential pressures in ventilation and air distribution systems. Its 1/2-inch conduit connection accommodates electrical wiring in applicable commercial HVAC installations.

The Setra differential pressure sensor converts pressure measurements into proportional voltage signals that can be monitored by building automation systems (BAS) and direct digital controllers (DDC).

Before installation, verify the pressure range, supply voltage, output signal, pressure tubing connections, controller input requirements, and mounting configuration to ensure proper compatibility.

Key Benefits

  • Manufacturer: Setra

  • Part Number: 26410R5WD2DA1E

  • Product Series: Model 264

  • Product Type: Differential Pressure Transducer

  • Pressure Range: 0–0.5 in. w.c.

  • Output Signal: 0–5 VDC

  • Accuracy: ±0.4% Full Scale

  • Conduit Connection: 1/2 inch

  • Designed for low differential pressure measurement.

  • Provides proportional analog voltage output for compatible controllers.

  • Supports HVAC duct pressure monitoring and ventilation control.

  • Suitable for building automation and DDC applications.

  • Helps monitor pressure conditions in air-handling equipment.

  • Designed for professional HVAC control system installation and maintenance.

Common Questions

Q: What is the Setra 26410R5WD2DA1E used for?

A: The Setra 26410R5WD2DA1E is a low differential pressure transducer used in compatible HVAC and building automation systems to monitor pressure differences and transmit a proportional analog signal.

Q: What is the pressure range of the Setra 26410R5WD2DA1E?

A: The pressure range is 0–0.5 inches water column (in. w.c.), as identified by the 0R5WD configuration code.

Q: What output signal does this Setra pressure transducer provide?

A: It provides a 0–5 VDC analog output for compatible building automation controllers and monitoring equipment.

Q: What is the accuracy of the Setra 26410R5WD2DA1E?

A: The specified accuracy is ±0.4% of full scale.

Q: Can this Setra Model 264 transducer measure HVAC duct static pressure?

A: Yes, it can be used in compatible duct static pressure monitoring applications when the pressure range and reference connections match the system requirements.

Q: Can I replace a 4–20 mA pressure transmitter with the Setra 26410R5WD2DA1E?

A: Not as a direct replacement without verifying the controller's input configuration. This model provides a 0–5 VDC output, which requires a compatible voltage input.

Q: What is the difference between a 0–0.5" WC and a 0–5" WC pressure transducer?

A: A 0–0.5" WC transducer measures a substantially lower pressure range than a 0–5" WC model. Using the incorrect range can result in inaccurate readings, poor measurement resolution, or an over-range condition.

Q: What should be checked before installing the Setra 26410R5WD2DA1E?

A: Verify the power supply, pressure range, output signal, tubing connections, wiring configuration, conduit entry, and controller scaling before installation.

Disclaimer

While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.

26410R5WD2DA1E is the cross for DPT2640-0R5D