Johnson Controls HX-68P3-0N000U Sensor
The Johnson Controls HX-68P3-0N000U Outdoor Relative Humidity and Temperature Sensor is an HVAC environmental transmitter designed to measure outdoor air conditions for building automation and climate-control systems.
Part of the HX-68P3-U Series, this device combines a thermoset polymer-based capacitive humidity sensor with an NTC thermistor to monitor relative humidity and dry-bulb temperature.
This Johnson Controls outdoor humidity transmitter measures relative humidity from 0% to 100% RH and temperature from -22°F to 122°F (-30°C to 50°C). Its two field-selectable analog outputs support 4–20 mA, 0–5 VDC, or 0–10 VDC signals for compatible building automation controllers.
The outdoor temperature and humidity sensor also supports configurable dew point, wet-bulb temperature, and enthalpy measurements.
A weather-resistant polycarbonate enclosure, stainless steel sensing probe, and integrated sun and wind shield help protect the sensing elements during outdoor operation.
For HVAC replacement or installation, verify controller input compatibility, power requirements, output configuration, mounting location, and wiring before commissioning.
Key Benefits & Technical Specifications
-
Manufacturer: Johnson Controls
-
Part Number: HX-68P3-0N000U
-
Product Series: HX-68P3-U
-
Product Type: Outdoor Relative Humidity and Temperature Transmitter
-
Application: HVAC building automation, outdoor environmental monitoring, and compatible control systems
-
Humidity Sensor: Thermoset polymer-based capacitive sensor
-
Temperature Sensor: NTC thermistor
-
Relative Humidity Measurement Range: 0% to 100% RH
-
Relative Humidity Accuracy: ±2% RH from 10% to 90% RH at 25°C
-
Dry-Bulb Temperature Range: -22°F to 122°F (-30°C to 50°C)
-
Temperature Accuracy: ±0.4°F (±0.2°C) from 32°F to 122°F
-
Additional Measurement Variables: Dew point, wet-bulb temperature, and enthalpy
-
Analog Outputs: Two field-selectable outputs
-
Selectable Output Signals: 4–20 mA, 0–5 VDC, or 0–10 VDC
-
Power Supply: 20–27 VDC or 16–27 VAC
-
Maximum Current Consumption: 50 mA at 24 VDC in current-output mode
-
Voltage-Output Mode Consumption: 30 mA maximum at 24 VDC
-
Operating Temperature: -22°F to 122°F (-30°C to 50°C)
-
Operating Humidity: 0% to 95% RH, noncondensing
-
Enclosure Material: Grey polycarbonate with gasket
-
Enclosure Protection: IP65 (NEMA 4X)
-
Enclosure Dimensions: 10.8 inches H × 5.5 inches W × 3.3 inches D
-
Sensing Probe: 304 stainless steel with porous filter
-
Probe Dimensions: 4.25 inches long × 0.5 inches diameter
-
Sun and Wind Shield: White nylon
-
Wiring Connections: Terminal block accepting 14–22 AWG conductors
-
Country of Origin: Canada
-
Installation: Exterior wall mounting in a location that minimizes direct solar exposure and airflow disturbances
Common Questions
Q: What does the Johnson Controls HX-68P3-0N000U measure?
A: The Johnson Controls HX-68P3-0N000U measures outdoor relative humidity and dry-bulb temperature.
It also supports configurable dew point, wet-bulb temperature, and enthalpy values.
These measurements can be transmitted to compatible HVAC building automation controllers for environmental monitoring and control.
Q: What output signals are available on the Johnson Controls HX-68P3-0N000U?
A: The transmitter provides two field-selectable analog outputs.
Each can be configured for:
-
4–20 mA
-
0–5 VDC
-
0–10 VDC
Before installation, verify the building automation controller's input requirements and configure the transmitter accordingly.
Q: Can the Johnson Controls HX-68P3-0N000U be installed outdoors?
A: Yes. The HX-68P3-0N000U outdoor humidity and temperature sensor is designed for outdoor environmental monitoring.
It features an IP65-rated enclosure with an integrated sun and wind shield.
For accurate measurements, install it in a suitable exterior location, preferably on a north-facing wall, away from direct sunlight, exhaust outlets, opening windows, and other sources of temperature or airflow disturbance.
Disclaimer
While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
HX-68P3-0N000U is the cross for HT-68P3-0N000, HT-6703-0N0GO, HE-68P3-0N000