Kunkle Valve 0537-E01-HM0125 Valve

The Kunkle Valve 0537-E01-HM0125 is a high-capacity ASME Section IV safety relief valve specifically engineered for low-pressure hot water boilers, heat exchangers, and generators. Featuring a 1" Female NPT inlet and a 1-1/4" Female NPT outlet, this bronze pressure relief valve is factory-set at 125 PSI with a certified flow capacity of 5,263 lb/h (5,262,619 BTU/h). This model 537 relief valve is National Board certified (HV designator) and utilizes a top-guided disc assembly with a resilient EPDM insert seating area to ensure a tight, bubble-leak-free seal after discharge. The B584 alloy 84400 bronze body and stainless steel spring provide superior thermal stability under standard 250°F operating conditions. Its unique isolating diaphragm protects critical internal components from corrosion and mineral buildup, while the heavy-duty lift lever allows for required manual testing. Designed to manage both thermal expansion and over-firing conditions, this valve is the industry standard for reliable hydronic system protection.

• ASME Section IV Certified: Fully compliant with "HV" code requirements for commercial and industrial hot water heating systems.
• Dual-Purpose Protection: Effectively manages overpressure from both fluid thermal expansion and hazardous over-firing conditions.
• Corrosion Resistant: Features a stainless steel spring and an isolating diaphragm to prevent discharged media from fouling the bonnet and spring chamber.
• High Discharge Capacity: Rated for over 5 million BTU/h to provide a massive safety margin for high-output boiler systems.
• Simplified Maintenance: The heavy-duty lift lever and top-guided design ensure consistent re-seating and ease of inspection for technicians.

What is the maximum operating temperature for the Kunkle 537 series?
This valve is rated for a maximum temperature of 250°F (121°C), making it suitable for most hydronic heating applications.

Does this valve work for steam heating boilers?
While it carries an ASME Section IV rating, it is specifically configured for water-service systems. Always verify if your specific application requires the "V" designator for steam or the "HV" for hot water before installation.

Can the set pressure be field-adjusted?
No, these valves are factory-set and sealed at 125 PSI. Tampering with the lead seal voids the National Board certification and may compromise system safety.

This item is not eligible for free shipping.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.