R-410A 25 Lbs Refrigerant Factory Sealed Gas 10 Units FREE SHIPPING

This 10-unit bulk pack of R-410A 25 lbs refrigerant is the industry standard for modern high-pressure HVAC systems. As a 100% virgin HFC blend consisting of 50% R-32 and 50% R-125, it provides superior heat transfer coefficients and higher system efficiencies compared to legacy HCFC units. Designed to operate at significantly higher pressures than R-22, R410A refrigerant gas allows for the use of smaller, more compact coils and condensers without sacrificing cooling capacity. Since this refrigerant is an azeotropic blend with a boiling point of -60.9°F and a critical pressure of 718 psi, it must be charged in the liquid phase to ensure proper composition. As an ASHRAE-listed A1 safety group refrigerant, it is non-flammable and features zero ozone depletion potential. These factory sealed R-410A cylinders are ideal for residential air conditioning, commercial rooftop units, and air-source heat pumps requiring POE (Polyolester) lubricant for reliable compressor operation.

Key Benefits for Technicians

• System Efficiency: High thermal conductivity and pressure characteristics enable superior energy performance in modern SEER-rated equipment.
• 100% Virgin Quality: Guaranteed purity ensures no non-condensables or moisture contamination, preventing thermal expansion valve (TXV) freezing and compressor wear.
• Bulk Service Ready: Ten 25 lb cylinders provide sufficient capacity for large-scale commercial retrofits or high-volume residential seasonal service.
• Environmental Compliance: Zero ODP (Ozone Depletion Potential) allows for full compliance with current EPA 608 regulations regarding CFC and HCFC phase-outs.
• Safety Rating: Classified as A1, minimizing site risks due to its non-flammable and low-toxicity profile during handling and charging.

Common Questions

Can R-410A be used to top off an R-22 system?
No. Under no circumstances should R-410A refrigerant be mixed with R-22. The operating pressures are significantly higher, and the mineral oil used in R-22 systems is not miscible with the HFC blend, which will lead to immediate compressor failure.

Is an EPA 608 certification required for purchase?
Yes, as a professional HVAC supplier, we require a valid EPA 608 license or resale statement prior to shipping this product. This item is currently available for shipment to the Lower 48 states only.

What oil should be used with R-410A?
Technicians must use polyolester (POE) oil. Unlike older refrigerants that used mineral or alkylbenzene oils, R-410A requires the moisture-absorbing properties of POE to ensure proper oil return to the compressor.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.