Schneider Electric (Erie) AG23A02A Actuator

The Schneider Electric Erie AG23A02A PopTop actuator is a robust 24Vac two-position motor designed for dependable control in hydronic systems. Engineered for normally open operation, this spring return actuator ensures fail-safe performance during power loss, automatically returning the valve to its default open state. This General Close-Off unit is built for high-performance integration with Erie PopTop zone valves, featuring a two-wire control setup and an integrated end switch for auxiliary signaling or cycling pump relays. With 18-inch wire leads, it simplifies installation in tight mechanical headers. The AG23A02A actuator provides a high-torque output of 10 psi differential pressure capacity, making it a standard for residential and light commercial fan coil and baseboard applications. Its synchronous motor technology minimizes energy consumption while maintaining the precise timing required for demanding HVAC zone control sequences.

Key Technical Benefits

• One-Handed Removal: The PopTop quick-release lever allows for rapid head replacement without draining the system or breaking pipe connections.
• Enhanced Fail-Safe Protection: The spring return mechanism provides consistent normally open status to prevent stagnation or freezing during power interruptions.
• Integrated End Switch: Simplifies wiring by providing a dry contact to initiate boiler firing or circulator activation once the valve is fully seated.
• Reduced Installation Footprint: Compact design allows for multi-zone manifold mounting where space between piping is limited.

Common Technical Questions

What is the maximum fluid temperature rating for this actuator?
The AG23A02A is designed for systems utilizing water or glycol solutions with temperatures ranging from 32°F to 200°F, provided the ambient air around the actuator stays below 104°F.

Can this actuator be used with other valve brands?
This Schneider Electric actuator is specifically designed to mate with Erie PopTop valve bodies. Using it with non-compliant bodies will lead to improper stem engagement and potential force-failure of the spring return.

How do I verify the end switch is functioning?
Using a multimeter set to continuity, check the leads when the actuator is fully energized; the end switch should close, completing the circuit to signal the next stage of the HVAC sequence.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.