Schneider Electric (Erie) VS2417 Valve Body

The Schneider Electric Erie VS2417 is a heavy-duty 1-inch sweat zone valve body engineered for high-capacity performance in two-way hydronic systems and low-pressure steam applications. Designed as a two-position steam valve body, this unit features a 7.5 Cv flow coefficient, making it ideal for managing fluid flow in large-scale terminal unit controllers, fan coils, and baseboard radiators. The forged brass construction ensures structural integrity under high temperatures, while the stainless steel stem and high-temperature EPDM seals provide reliable shut-off against high differential pressures. This Erie Pop-Top series valve body is compatible with the AG and AH series actuators, allowing for quick, "one-handed" installation or replacement without draining the system. Contractors rely on the VS2417 valve body for its consistent close-off pressure ratings and its ability to withstand the cycling demands of commercial boiler loops.

• High Flow Capacity: The 7.5 Cv rating reduces pressure drop across the 1-inch sweat connections for optimized system efficiency.
• Steam Rated: Specific internal metallurgy and seat design allow for reliable operation in low-pressure steam environments.
• Serviceability: Compatible with Pop-Top actuator mounting, enabling fast head replacement without breaking pipe connections.
• Application Versatility: Optimized for use in both heating and cooling circuits with standard water or glycol concentrations.

What is the maximum differential pressure for the VS2417?
The VS2417 is designed to provide high close-off ratings, typically maintaining positive shut-off up to 20 PSI differential pressure when paired with the appropriate actuator.

Is this valve body compatible with non-Schneider actuators?
This body is specifically machined for the Erie Pop-Top mounting system; it is intended for use with Schneider Electric AG and AH series spring-return or non-spring-return actuators.

Can the VS2417 be installed in any orientation?
The valve should be installed with the actuator in the upright position or at an angle no lower than 90 degrees from the vertical plane to prevent moisture buildup in the motor housing.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.