Schneider Electric (Erie) VT2417G23A020 Valve Assembly

The Schneider Electric (Erie) VT2417G23A020 Valve Assembly is a contractor-grade two-way normally open zone valve engineered for precision flow control in hydronic systems. Featuring a 1-inch sweat connection and a robust flow coefficient of 7.5 Cv (often rated up to 8.0 Cv in general service), this PopTop series assembly is designed for rapid installation and reliable performance in 24Vac circuits. The integrated spring return mechanism ensures consistent fail-safe positioning, while the two-position (on/off) actuator provides predictable system response for fan coils, baseboards, and air handlers. Built with a brass body and a NEMA 1 rated actuator, this assembly supports a wide range of media temperatures, handling hot or chilled water and glycol mixtures up to 50% concentration with a typical close-off pressure rating of 17 PSI.

• Modular PopTop Design: The actuator can be removed or engaged with one hand, allowing for easy replacement or service without breaking the hydraulic line.
• Hysteresis Synchronous Motor: Provides consistent spring return performance and long-term durability in high-cycle two-position HVAC applications.
• High Flow Efficiency: The 7.5 Cv rating minimizes pressure drop across the 1" sweat valve body, optimizing system pump performance.
• Field-Proven Reliability: Rated for up to 300 psig static pressure, making it a staple for commercial and residential hydronic zoning.

Is the actuator replaceable without draining the system?
Yes, the Erie PopTop design allows the 24V actuator to be swapped out without removing the 1-inch valve body or draining the loop.

What is the fail-safe position for the VT2417G23A020?
This specific model is Normally Open (N.O.), meaning the valve remains open during a power loss or when the thermostat is not calling for a change in state.

Can this valve be used in steam applications?
Standard VT series bodies are typically rated for hot and chilled water; while some variants support low-pressure steam, this general-service brass trim model is optimized for water and glycol-based hydronic systems.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.