Trane MOT2364 Motor

The Trane MOT2364 Motor is a high-performance 1/3 HP condenser fan motor engineered for demanding HVACR service applications. Operating at 208-230V and a sustained 1100 RPM, this single-phase HVAC motor is a direct OEM replacement motor for various Trane and American Standard outdoor units. Built on a standard 48 frame chassis with a 5-5/8 inch diameter, it features automatic thermal overload protection and Class B insulation to ensure reliable operation under high ambient temperature conditions. With a service factor of 1.0 and a 1/2 inch shaft diameter, this motor provides the torque and mechanical stability required for consistent airflow through the condenser coil, maintaining optimal system pressures and efficiency.

Key Benefits

• Direct OEM Compatibility: Ensures exact physical fitment and electrical alignment with Trane MOT2364 specifications, eliminating the need for complex mounting modifications.
• Industrial-Grade Reliability: Features permanently lubricated sleeve bearings and a totally enclosed air over (TEAO) design to resist moisture and debris infiltration.
• Optimized Performance: The 1100 RPM speed rating is calibrated for specific fan blade pitches, preventing motor overheating and maximizing heat transfer across the coil.
• Standardized 48 Frame: Provides a versatile 5.6-inch motor diameter that fits standard belly-band or stud-mount configurations used in residential and light commercial equipment.

Common Questions

What capacitor is required for the Trane MOT2364?
This motor typically requires a 7.5 MFD / 370V run capacitor. Always verify the ratings on the motor nameplate before installation, as using an incorrect capacitor will lead to winding failure.

Can I use this as a replacement for an 825 RPM motor?
No. Replacing an 825 RPM motor with an 1100 RPM motor will increase the static load on the fan blade, likely causing the motor to trip on its automatic thermal protector or fail prematurely. Always match the RPM rating exactly.

Is the rotation reversible on this unit?
The MOT2364 is typically configured for counter-clockwise (CCW) rotation lead end. Verify your specific fan blade rotation requirement (CW or CCW) before completing the install to ensure proper airflow direction.

This item is not eligible for free shipping.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.