Weil McLain 382-200-430 Termination Kit

Weil McLain 382-200-430 Termination Kit

Weil McLain

  • $493.00


The Weil McLain 382-200-430 Intake/Exhaust Termination Kit is the OEM sidewall vent/air cap termination kit that finishes the outside-wall end of a direct-vent installation on a Weil-McLain condensing gas boiler. It is the termination kit for systems that run 3-inch AL29-4C stainless steel vent pipe together with 3-inch PVC air pipe, and it is the AL29-4C kit used with the ECO Series boilers. It gives the exhaust and the combustion air intake one weather-protected, factory-engineered point of entry and exit through the exterior wall. The kit contains the black plastic intake/exhaust cap, the inside and outside cover plates (the mounting and backing plate pair), the mounting hardware and the installation instructions, so the wall penetration can be framed, sealed and finished with parts that were engineered to work together.

The 382-200-430 sits in a numbered family of Weil-McLain termination kits, and the difference between the kits is the pipe material and the venting method. The 383-500-397 is the sidewall vent/air cap termination kit for PVC vent and air pipes, while the 382-200-430 is the version for AL29-4C vent pipe and PVC air pipe. The 383-500-398 is the 4-inch PVC sidewall kit, the 383-500-350 is the 3-inch concentric vent termination kit, and the 383-500-778 is the direct exhaust venting kit with interior and exterior intake/exhaust plates. The openings in the 382-200-430 are sized for 3-inch pipe, so a system built with 2-inch vent and air pipe needs a field-installed 3 x 2 adapter at the termination. Bird screens are a separate part; the 383-500-105 is the screen for 3-inch PVC vent and air pipes.

The termination is the part of a venting system that everyone sees and nobody inspects. A cracked or sun-faded cap, a cover plate that has pulled away from the siding, or a loose seal at the wall lets rain, insects and cold air into the wall opening, and a nest or an ice build-up across the intake shows up as a pressure switch lockout or a boiler that will not hold a burn. When a boiler is being re-vented, or a termination was damaged during a siding or window job, replacing the whole kit is cleaner than patching the old one. Set the backing plate square, seal the wall penetration the way the boiler manual describes, keep the cap clear of snow, grade, windows and other openings by the clearances in the venting section, and confirm the vent and air pipes are fully seated in the cap before the boiler is fired. Match the kit to the boiler by model and serial number.

Key Benefits

  • Factory-Matched Termination: The cap, cover plates and hardware are specified by Weil-McLain for this vent configuration, so the wall opening, the pipe sizes and the cap all agree.
  • Built for AL29-4C Vent Systems: Sized for 3-inch AL29-4C stainless vent pipe with 3-inch PVC air pipe, the combination this kit is made for.
  • Weather-Protected Wall Penetration: The inside and outside cover plates finish the exterior wall opening on both faces and keep rain, wind and pests out of the penetration.
  • Complete Kit: Plastic cap, mounting and backing plate, hardware and instructions arrive together, so the install does not stall on a missing fastener.

Common Questions

  • What pipe does the 382-200-430 terminate? 3-inch AL29-4C stainless vent pipe and 3-inch PVC air pipe. For an all-PVC system the matching kit is the 383-500-397.
  • Can it be used with 2-inch pipe? Only with a field-installed 3 x 2 adapter, because the cap openings are sized for 3-inch pipe.
  • Are bird screens included? The kit contents are the cap, cover plates and mounting hardware. Bird screens are a separate part, such as the 383-500-105 for 3-inch PVC vent and air pipes.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.