York 364-47667-014 Valve Kit

The York 364-47667-014 Valve Replacement Kit is a York Applied service kit from the 364-47667 series. It belongs to the family of valve replacement kits York uses to renew the valve section of its compressors, the suction and discharge valves that open and close on every compression cycle to keep refrigerant moving one way. When valve hardware wears or stops seating, the compressor cannot hold pressure across the cylinder, and a kit like the 364-47667-014 lets you replace the worn pieces with factory-numbered parts.

The valve section works as a pair of check valves. The suction valve admits gas, the discharge valve passes compressed gas to the system, and gaskets keep the head and valve assembly sealed so the two sides stay apart. Valve springs and rings control how each valve moves and seats. For a documented example from the same series, the 364-47667-006 kit lists valve springs, gaskets, a suction valve ring and a discharge valve ring. The 364-47667-014 sits in the same numbering family as the carried 364-47667-009 Top Head Kit, the 364-47667-010 Valve Kit and the 364-47667-006 Top Head Valve Replacement Kit. Each dash number is its own service kit, so the full part number matters: match it to the kit called for on your compressor's parts list rather than substituting a neighboring number.

A tired valve section reveals itself through low pumping capacity, a suction pressure that stays high, an elevated discharge temperature, long run time, or pressures that equalize quickly after shutdown. Confirm the symptoms with a pressure and temperature check before you commit to the repair. During the job, recover the refrigerant, clean all sealing surfaces, replace the gaskets, seat the new valve hardware per the manufacturer's procedure, and finish with a leak test and evacuation before the system goes back in service.

Key Benefits

• York Valve Kit: A factory service kit from the 364-47667 series, numbered so it can be matched against a parts list.
• Targets the Valve Section: Built for the suction and discharge valve hardware, the part of the compressor where a leak costs capacity first.
• Full Number Identification: 364-47667-014 identifies one specific kit inside the series, separate from -006, -007, -013, -015 and -016.
• Educational Fit: Series context and symptom guidance help you confirm the diagnosis before you open the compressor.

Common Questions

• What is the 364-47667-014? A York Applied valve replacement kit in the 364-47667 series, used to renew worn valve hardware in the valve section of a York compressor.
• What are typical symptoms that call for it? Low pumping capacity, high discharge temperature, a suction pressure that will not pull down and pressures that equalize fast after shutdown.
• Is the 364-47667-014 the same as the 364-47667-016? No. They are separate numbers in the same series. Order the one your compressor's parts list calls for.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.