York S1-024-40886-000 Motor

The York S1-024-40886-000 Condenser Fan Motor is a high-performance OEM solution engineered for reliable heat exchange in residential and light-commercial HVAC units. Operating at 230V 1-Phase power, this 1/8 HP motor delivers a steady 1075 RPM to maintain optimal airflow across the condenser coils. As a veteran-grade PSC motor, it features a Totally Enclosed Air Over (TEAO) design with an NEMA 42 frame, ensuring internal components are protected from contaminants and moisture while benefiting from the system's own discharge air. This motor uses Clockwise Lead End (CWLE) rotation, making it a drop-in replacement for specific older configurations. Utilizing ball bearings for reduced friction and a 0.25-inch shaft diameter, it is purpose-built to withstand the high-cycle demands of modern cooling systems without sacrificing efficiency.

This unit serves as the direct replacement motor for obsolete part numbers S1-024-35356-000 and S1-024-36238-000. When performing a swap in the field, technicians should verify the existing lead orientation and ensure the run capacitor (typically 5 MFD/370V or as specified by the unit nameplate) is in good health to prevent premature winding failure. Whether you are servicing a compact 10 SEER unit or a standard split system, the York condenser fan motor provides the exact OEM fitment required to restore factory-spec cooling performance and prevent high-pressure compressor trips.

• Direct OEM Fitment: Engineered specifically for York and Coleman systems, eliminating the mounting headaches found with universal "rescue" motors.
• High-Efficiency PSC Design: Permanent Split Capacitor configuration provides consistent torque and lower amperage draw (approx. 0.8 Amps).
• Enhanced Durability: The TEAO enclosure and ball bearing construction are designed for continuous outdoor operation in harsh environments.
• Simplified Serviceability: Standardized 42-frame sizing and CW rotation allow for rapid installation on common 5/16-inch or 7/16-inch mounting hardware.

What are the signs that my York condenser motor needs replacement?

Technicians typically see high-pitched bearing noise, "dead spots" where the fan requires a manual nudge to spin, or an internal thermal overload trip caused by a failing run capacitor or high winding resistance.

Does this motor include a new run capacitor?

This is the motor only. It is professional best practice to replace the capacitor during every motor swap to ensure the new windings are not stressed by an out-of-tolerance component.

Is this a direct replacement for non-York units?

While specifications like 1/8HP and 1075RPM are standard, you must verify the frame size, rotation (CWLE), and shaft length (approx. 2.37 inches) to ensure compatibility with third-party fan blades and shrouds.

This item is not eligible for free shipping.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.