York S1-026-32623-700 Inducer Wheel

The York S1-026-32623-700 Inducer Wheel is a critical combustion component designed for high-efficiency draft induction in York, Coleman, and Luxaire gas furnaces. This 4-inch diameter by 1-inch width blower wheel is engineered for counterclockwise (CCW) rotation, ensuring precise static pressure and exhaust gas flow through the secondary heat exchanger. Featuring a standard 1/4" bore size, it serves as a direct OEM replacement for residential and light commercial HVAC equipment where the original polymer or metal wheel has suffered thermal stress or corrosive fatigue.

As a veteran-grade OEM furnace part, the S1-026-32623-700 is built with durable materials that resist the acidic environment typical of condensing furnace combustion. HVAC contractors rely on this draft inducer blower wheel to eliminate common vibration issues and "hunting" pressure switch faults in systems requiring a 4x1 CCW configuration. When handling a York inducer wheel replacement, verify the motor shaft integrity and ensure the set screw or spring clip is properly seated to maintain factory-balanced performance and prevent premature bearing wear on the draft motor assembly.

• Precise OEM Fit: Specifically engineered for York and Coleman furnace inducer motor shafts with a 1/4 inch bore.
• Optimal Air Movement: The 4" x 1" configuration provides reliable CFM required to clear the combustion chamber and satisfy pressure switch settings.
• Thermal Stability: Constructed to withstand high flue gas temperatures without deforming or cracking.
• Vibration Reduction: Balanced design minimizes harmonic noise and extends the service life of the inducer motor assembly.

What are the symptoms of a failing inducer wheel?
Technicians usually identify a failing wheel by loud rattling or high-pitched screeching sounds during the pre-purge cycle. Physical inspection often reveals cracked vanes or a loose hub that prevents the furnace from reaching the necessary pressure to close the safety switches.

Is this wheel compatible with other brands?
While designed for York S1-026-32623-700 specifications, it is a common 4x1 CCW 1/4" bore part also used in certain Coleman, Luxaire, and Fraser-Johnson units. Always verify the rotation and dimensions against the manufacturer's data plate.

Can I replace just the wheel instead of the whole motor assembly?
Yes, if the inducer motor is still electrically sound and the shaft is not excessively corroded, replacing just the wheel is a cost-effective solution for restoring proper draft induction.

This item is not eligible for free shipping.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.