Johnson Controls VG7000-6002 Packing Kit

As a seasoned technician, you know that a leaking valve stem can compromise an entire hydronic or steam system's efficiency. The Johnson Controls VG7000-6002 Packing Kit is the professional-grade solution for rebuilding the stuffing box on VG7000 Series Bronze Control Valves equipped with brass trim. Specifically engineered for larger 1" to 2" pipe sizes, this kit is the direct replacement for VG7000-6004 (previously sold as 10-packs) and provides a single, comprehensive field-service set for a 3/8" valve stem.

This valve repacking kit is designed to restore tight shutoff performance and prevent hazardous bypass or environmental loss in HVACR control systems. Unlike generic seals, these genuine Johnson Controls parts ensure perfect actuator compatibility, maintaining the correct friction coefficient for pneumatic and electric actuators alike. Whether you are servicing globe valves in a high-pressure steam application or a chilled water loop, this kit provides the high-temp resiliency required for Class 250 rating compliance.

Key Benefits:

• Complete Field Service Set: Includes two ring packs (U-cup with installed O-ring), stem wiper, stem guide, specialized insertion/removal tool, sleeve packing installer, grease tube, and crocus cloth for stem polishing.
• Optimized for 3/8" Stems: Precision-fit for 1-inch, 1-1/4 inch, 1-1/2 inch, and 2-inch VG7000 series valves with brass trim.
• Leak Prevention: Restores the integrity of the valve stuffing box to prevent energy loss and protect commercial HVAC actuators from moisture damage.
• Durable Material Composition: High-grade elastomers and PTFE-reinforced components provide long-cycle life in demanding saturated steam (up to 338?F) and hot water environments.

Common Questions:

How do I know if I need the VG7000-6002 or the VG7000-6001?
The VG7000-6002 is specifically for 1" through 2" valves which utilize a 3/8" stem. If you are working on a 1/2" or 3/4" valve, those typically use a 1/4" stem and require the VG7000-6001 kit.

Is this kit compatible with stainless steel trim valves?
No. This kit is strictly for brass trim valves. Stainless steel trim models utilize a different PTFE V-ring packing (typically the VG7000-6012 for 3/8" stems) to handle different thermal expansions and chemical requirements.

Can I replace the packing while the system is under pressure?
Standard safety protocol dictates that the VG7000 Series Valve must be isolated and system pressure relieved before attempting to remove the packing nut or old seals to prevent technician injury and equipment damage.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.