KMC Controls CCC-1002 Receiver Controller

The KMC Controls CCC-1002 Receiver Controller is a high-performance dual-input pneumatic controller designed for precise pressure management in commercial HVAC systems, air handling units (AHUs), and VAV systems. Built with a rugged ABS UL 94HB plastic housing, this proportional control device receives 3 to 15 psig signals from pneumatic transmitters and sensors to drive HVAC actuators and valve control systems. Its field-selectable design supports both direct and reverse acting control sequences, making it a versatile pneumatic receiver controller for maintaining stable temperature and humidity levels. With an adjustable authority ranging from 20% to 200% and a high main valve capacity, the CCC-1002 provides the necessary 43.2 SCIM air consumption efficiency for demanding environments like hospitals and laboratories. The unit features 3/16-inch nipples for standard 1/4-inch OD polyethylene tubing, ensuring a seamless fit for technicians performing system-wide pneumatic troubleshooting or upgrades.

• Dual-Input Versatility: Supports remote setpoint adjustment and dual pneumatic inputs (3 to 30 psi) for complex control loops.
• Precise Authority Adjustment: Field-selectable 20% to 200% authority allows for fine-tuning based on primary input signals.
• High Output Capacity: Features high main valve capacity (43.2 SCIM) to effectively drive multiple pneumatic actuators or large valves.
• Field Selectable Action: Easily switch between direct and reverse action to match specific application requirements without replacing hardware.
• Wide Operating Range: Performs reliably in environments ranging from 40??F to 120??F.

How do I configure the CCC-1002 for direct versus reverse action?
The control action is field-selectable via internal adjustments, allowing the proportional control signal to increase or decrease in response to the input transmitter signal based on your specific sequence of operation.

What type of tubing is compatible with this receiver controller?
This model includes 3/16-inch (5 mm) nipples specifically designed for 1/4-inch (6 mm) OD polyethylene tubing, which is standard for most pneumatic control systems.

Can the CCC-1002 be used for low-limit applications?
While the CCC-1002 is a highly flexible proportional controller, it is primarily used for standard valve and actuator control. For dedicated low-limit safety applications, verify if a specialized limit controller like the CCC-1001 is required for your specific sub-system.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.