Peco Controls RW205-001 Receiver Module

The Peco Controls RW205-001 Wireless Receiver Module is a specialized component within the PECO Wave Wireless System, engineered to handle PTAC, PTHP, and fan coil applications without the need for extensive rewiring. This module utilizes Frequency Hopping Spread Spectrum (FHSS) technology in the 902 to 928 MHz band, ensuring resilient communication and minimal interference in high-density environments. Field-proven for its versatility, the RW205-001 supports up to 1 Heat / 1 Cool configurations and provides dedicated outputs for up to 3-speed fan control, reversing valves, and outside air dampers. Contractor-grade reliability is built-in with a dual-voltage input range of 24 VAC or 100-277 VAC, allowing for flexible integration into both low-voltage and line-voltage HVAC equipment. When paired with a TW206 thermostat, this receiver enables full compliance with ASHRAE 90.1 and California Title 24 building codes, making it an essential pick for modern retrofit projects.

• Reduced Installation Labor: Eliminates the need to pull new wires through walls, significantly cutting down project hours and occupant disruption.
• Enhanced Signal Reliability: The FHSS technology prevents cross-talk with other wireless devices, maintaining a stable 100-foot range in typical installations.
• Highly Adaptable Power: Features a voltage selection switch for 24V or 110/277V operation, accommodating diverse power requirements on any job site.
• Non-Volatile Memory: The EEPROM storage ensures all system parameters and configuration settings remain intact during power outages.
• Advanced HVAC Control: Includes terminal connections for occupancy sensors, door switches, and remote temperature probes to optimize energy efficiency.

Is the Peco RW205-001 compatible with multi-speed fan systems?
Yes, the module supports 1, 2, or 3-speed fan control and allows for cycling (Auto) or continuous (On) fan modes depending on the thermostat configuration.

What is the maximum wireless range for the RW205-001?
The system is rated for a minimum of 100 feet in open air. To maintain strong signal strength, ensure the receiver is located away from large metal obstructions or enclosures.

How do I set the input voltage for the receiver?
The RW205-001 features a physical voltage selection switch inside the housing. You must set this to the correct position (24V or 110/277V) before applying power to avoid damaging the circuitry.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.