SP20 | Analog Multimeter with Continuity Check Beeper

  • $72.88

This shock resistant analog multimeter gives an audible beep to verify circuit continuity.

The Sanwa SP20 is a portable analog multi-tester with 20ch measurement ranges.

The SP20 is specially designed for low power circuits and home electric appliance testing. This meter is an Internal magnet type, Taut band meter with a full-scale accuracy of 3%. The device is capable of measuring ACV and DCV along with high voltage DC of up to 25kV (using optional HV-10 probe). The device is also capable of measuring resistances of up to 2MΩ and capacitance with a full-scale value of 500uF. Temperature measurement is also possible using the optional T-THP temperature probe.

The SP20 has protective covering which provides protection against drop shocks. The circuit is protected by a fuse rated at (250V/0.5A) with a blowout capacity of 500 Amperes.

Includes meter, one set of test leads and instruction manual.

  • Drop shock proof taut-band meter
  • 20ch measurement ranges
  • Capacitance measurement 500μF
  • Tilt stand
  • DC high voltage and temperature measurement (with optional accessories)


Function Range Tolerance
DCV 0.3(5kΩ)/3/12/30/120/600V(20kΩ/V) Within ±3%
±DCV ±6/30V(20kΩ/V) ±5% of full scale
ACV 12/30/120/300/600V(9kΩ/V) ±3% of full scale
DCA 60μ/30m/0.3A ±3% of full scale
Resistance 2k/20k/2MΩ ±3% of arc
Capacitance 500μF Approximate value
Continuity ≦ approx.100Ω: Beep sounds. Open circuit voltage: approx. 3V
Battery check 1.5V/1.5V button(1.0 to 2.0V) Approximate value
Frequency characteristic AC12V range 40Hz to 100kHz: frequency response within ±3%
Battery R6P(AA battery)1.5Vx2
Built-in fuse New model: F0301 Φ5x20mm 0.5A/250V 300A Glass fuse 
Size/Mass H144×W99×D41mm / Approx. 270g
*The value in ( )at DCV and ACV is input resistance

Carbon-neutral shipping with Shopify Planet
All deliveries are carbon neutral


Have a Question?

Be the first to ask a question about this.

Ask a Question