Watts 0121451 Valve

The Watts 0121451 (Model 140S-3-1-150) is a high-capacity automatic reseating temperature and pressure relief valve engineered for protection in commercial hot water supply systems. Designed for heavy-duty tank tappings, this 1-inch valve features a 3,085,000 BTU/hr steam discharge capacity and a standard 150 psi pressure relief setpoint. As a veteran-grade commercial T&P relief valve, it utilizes a bronze body and a 3-inch stainless steel thermostat to ensure rapid response to temperature spikes reaching 210°F. The 0121451 is cross-compatible with the LF140S3-150-1 and features NPT female connections for a secure, leak-free fit during installation. Unlike standard residential models, the Watts 140S series incorporates tamper-resistant bonnet screws and a non-mechanical seat-to-disc alignment, preventing nuisance leaks while maintaining strict ASME and CSA (AGA) safety standards for high-demand water heaters.

Key Benefits for the Contractor:

• Maximum Protection: High-performance 3,085,000 BTU rating handles large commercial water heating loads.
• Durable Construction: Heavy-duty bronze body with stainless steel thermostat tube for long-term reliability in corrosive conditions.
• Precise Reseating: Automatic reseating design with tamper-resistant bonnet screws ensures the valve returns to its seal after operation.
• Lead-Free Alternative: The LF140S3-150-1 conversion ensures compliance with modern safe drinking water regulations.
• Efficient Installation: 1-inch FNPT inlet and outlet allow for direct installation onto tank tappings without complex adapters.

Common Questions about the Watts 0121451:

Can the 140S-3 be used in place of the LF140S3?
Yes, the 0121451 is technically identical to the 140S-3-1-150 and serves as the equivalent to the LEAD FREE LF140S3-150-1. Always verify local jurisdictional requirements regarding lead-free hardware for potable water systems.

What causes constant dripping from a T&P valve?
Dripping usually indicates thermal expansion or high incoming water pressure over 150 psi. If the system lacks a thermal expansion tank, the valve will release small amounts of water to protect the heater's structural integrity.

Does this valve include a flood sensor?
Standard 0121451 models are designed for commercial hot water heaters, but some modified versions in the Watts 140 series may include SentryPlus Alert technology. Verify your specific SKU requirements if monitoring for discharge is necessary.

This item is not eligible for free shipping.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.