ASCO 8210G95-240V Solenoid Valve

The ASCO 8210G95-240V is a rugged, 2-way normally closed solenoid valve designed for high-performance fluid control in demanding industrial environments. Built with a heavy-duty brass body and reliable NBR seals (Buna-N), this pilot-operated valve ensures low internal leakage and a long service life when handling air, inert gas, or water. Featuring a 3/4 inch NPT connection and a 5 Cv flow coefficient, it provides high-flow capacity with an operating pressure differential of 0 to 150 PSI. This general service valve is equipped with a NEMA 4X enclosure, providing superior protection against corrosion and watertight integrity for outdoor or hose-down applications. Designed for 240Vac operation, it is a staple for contractors managing industrial water control, large-scale laundry equipment, and commercial air compressor systems where fail-safe normally closed functionality is required.

• High-Flow Efficiency: The 3/4 inch orifice and 5 Cv rating allow for substantial flow rates in general service applications.
• Environmental Durability: The NEMA 4X rating ensures the solenoid stays protected in corrosive or wash-down environments.
• Zero Minimum Differential: Operates effectively even at 0 PSI, making it ideal for low-pressure gravity-fed systems.
• Robust Construction: Features 305 stainless steel core tubes and 430F stainless steel cores for industrial-grade reliability.
• Versatile Mounting: This ASCO RedHat II series valve can be mounted in any position, though upright is recommended to minimize sediment buildup.

What media is compatible with the NBR seals in this valve?
The NBR (Nitrile) seals are optimized for air, inert gas, and water. For high-temperature steam or corrosive chemical applications, consult the chemical resistance guide to verify elastomer compatibility.

Does this valve require a minimum pressure to open?
No, the ASCO 8210G95 is designed to operate with a 0 PSI minimum differential, allowing it to open and close regardless of line pressure.

Can I use this 240V valve in a 120V circuit?
No, this unit is specifically wound for 240Vac. Wiring it to a 120V source will result in insufficient magnetic force to lift the pilot-operated diaphragm, causing the valve to fail to open.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.