Copeland 527-0056-00 Mounting Kit

The Copeland 527-0056-00 Compressor Mounting Kit is a genuine Copeland OEM mounting kit from the 527-series of compressor mounting parts. Mounting kits are the hardware that sits between the compressor feet and the base or rails of the unit. Their job is to hold the compressor in position while isolating its vibration from the base, the tubing and the cabinet, which keeps the compressor noise down and prevents the tubing fatigue and fractures that come from a compressor shaking against rigid mounts. Skipping the isolation hardware, or reusing hardened and flattened old rubber, is a common reason a replacement compressor ends up louder than the one it replaced.

Copeland assigns a specific mounting kit to each compressor family, and the kit is listed in the MTG Parts column of Copeland's own compressor tables. For example, 527-0044-08 is listed for most CR, CF, CS and CT models, 527-0044-00 for the larger CR47KQ, CR53KQ, CR60KQ, CR60K5 and CF12K6E models, 527-0116-00 for the CRN5-0500, CRNQ-050, CRP5-0450, CRPQ-0450, CRT5-0450 and CRTQ-0450 models, 527-0039-04 for the RE, RF, RR and RS families, and 527-C001-00 and 527-C001-02 for the A-family compressors. The spring-type isolation kit 527-0057-00 is a different design again. Because each kit is matched to a compressor's foot pattern and bolt size, the number on the kit has to match the number your compressor's model calls for, and the 527-0056-00 should only be ordered when your compressor's model calls for it.

When you are changing a compressor, treat the mounting hardware as part of the job. Replace the grommets, sleeves and washers as a set rather than reusing hardened rubber, and torque the mounting bolts snug without crushing the isolators, because over-tightening defeats the isolation and under-tightening lets the compressor walk. Check that the compressor sits level, that the suction and discharge lines have a little flexibility (a loop or offset) so vibration is not carried into the tubing, and that nothing rigid touches the compressor shell. Confirm the correct kit against the model number and serial number on the compressor nameplate before ordering, and contact our team if you want help matching the number.

Key Benefits

• Genuine Copeland OEM: Factory 527-0056-00 mounting kit from Copeland's own mounting-parts series.
• Vibration Isolation: Holds the compressor in position while keeping its vibration and noise out of the base and refrigerant tubing.
• Matched to the Compressor: Copeland assigns each kit by model, so the number on the box is what you check against the nameplate.
• Refresh the Hardware: Fresh isolators are good insurance on any compressor replacement.

Common Questions

• What does a compressor mounting kit do? It mounts the compressor to the base while isolating vibration, which protects the tubing, controls noise and keeps the compressor stable and level.
• How do I know I need the 527-0056-00 and not another 527 kit? Copeland assigns each 527-series kit to specific compressor models, so match the kit number to your compressor's model and serial number (for example, 527-0044-08, 527-0116-00 and 527-0039-04 each go with different families). If you are unsure, contact our team.
• Should I replace the mounting hardware when I replace a compressor? Yes. Hardened or flattened rubber no longer isolates, so replacing the grommets, sleeves and washers is standard practice on a compressor change.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.