Hartland Controls CON-2/24/30 Contactor

The Hartland Controls CON-2/24/30 is a heavy-duty, 2-pole definite purpose contactor designed for reliable load switching in residential and commercial HVACR systems. Engineered with a 24VAC 50/60Hz coil, this electromechanical component manages up to 30 Amps of inductive current (FLA), making it a standard choice for outdoor condensing units and refrigeration systems. Built to survive high-cycle applications, it features silver cadmium oxide contacts to minimize arcing and extend the mechanical life of the device. This unit is part of the HCC Series and is specifically rated for 40 Amps resistive (RES) at 600VAC, providing a high dielectric strength of 2200VAC between poles. For technicians performing field replacements, the CON-2/24/30 offers seamless compatibility with existing wiring via #10-32 screw terminals and 0.25-inch quick-connect coil terminations. This model serves as the primary direct replacement for 310020Q06XXXA and PE-05-2301, ensuring a drop-in fit with no additional mounting modifications required in most chassis-mount configurations.

• High-Conductivity Contacts: Equipped with silver cadmium oxide (AgCdO) for superior electrical conductivity and resistance to contact welding.
• Universal Compatibility: Serves as a direct replacement for Honeywell, Packard, and other OEM contactors including 310020Q06XXXA.
• Rugged Construction: Class B insulation system rated for temperatures up to 130?C to handle harsh compressor compartment environments.
• Efficient Load Control: Validated for 120A Locked Rotor Amps (LRA) at 600VAC to ensure safe startup of high-torque motors.

Common Questions

What is the difference between an inductive and resistive amp rating on this contactor?
The Hartland Controls CON-2/24/30 is rated at 30 Amps FLA (Full Load Amps) for inductive loads like compressors and motors, and 40 Amps for resistive loads like electric heat strips. Always match your load type to the corresponding rating to prevent premature failure.

Can I use a 24V coil contactor to replace a 120V model?
No. The coil voltage must match your systemÆs control voltage. This definite purpose contactor is specifically designed for 24VAC control circuits. Using a different voltage will either fail to pull in the contacts or burn out the coil immediately.

Is this a single-pole or dual-pole contactor?
This is a 2-pole contactor, meaning it breaks both "legs" of power to the equipment. This is preferred for safety in 208/230V systems to ensure no voltage remains at the load when the thermostat is satisfied.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.