Honeywell M7294A1010 Motor

The Honeywell M7294A1010 is a high-torque Modutrol IV motor designed for reliable electronic modulation of dampers and valves in commercial HVACR systems. Delivering a robust 300 lb-in torque, this non-spring return actuator is the preferred 203762C replacement for contractors upgrading legacy Series 90 or Series 70 setups. Operating on 24Vac, it accepts a standard 2-10Vdc control signal to provide precise positioning across a field-adjustable stroke of 90 to 160 degrees, with a factory-set default of 160 degrees.

Built for the rigors of the field, the M7294A1010 features a durable die-cast aluminum housing and an integral junction box that provides NEMA 3 weather protection when mounted upright. The dual-ended square shaft (3/8 inch) allows for versatile mounting, and the oil-immersed gear train ensures consistent performance in demanding environments. This motor is engineered for efficiency with a 15 VA power consumption and a nominal timing of 60 to 120 seconds, making it a staple for balancing and air-side control applications.

• Direct Retrofit Compatibility: Specifically designed as the Honeywell 203762C replacement, ensuring seamless integration with existing linkages.
• High Torque Capacity: Massive 300 lb-in torque rating handles heavy-duty damper assemblies and large valve bodies without stalling.
• Adjustable Precision: Field-adjustable stroke (90° to 160°) allows for fine-tuning airflow and fluid control to exact site specifications.
• Weatherproof Reliability: NEMA 3 rated integral junction box protects internal wiring from moisture and debris.
• Installation Versatility: Dual-ended shaft and foot-mounted design provide multiple orientation options for tight mechanical spaces.

What is the primary control signal for the Honeywell M7294A1010?
This motor utilizes a modulating 2-10Vdc control signal. It is also compatible with 4-20mA signals when using a 500-ohm resistor across the input terminals, though 2-10Vdc is the native analog input.

Can this motor be used in outdoor applications?
Yes, the M7294A1010/U features a die-cast housing and a junction box that meets NEMA 3 standards, making it suitable for outdoor use provided it is mounted in the recommended upright position to prevent water ingress.

Does the M7294A1010 have a fail-safe position?
No, this is a non-spring return motor. It will maintain its last position upon loss of power rather than returning to a "normal" or "closed" state. For applications requiring a fail-safe, a spring-return model should be specified.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.