Schneider Electric (Erie) AP23A000 Actuator

The Schneider Electric Erie AP23A000 Actuator is a 24Vac proportional modulating actuator designed for the Erie PopTop series valve bodies. Built for high-performance fluid control in fan coil, baseboard, and air handler systems, this normally open (N.O.) motor utilizes a synchronous motor drive with a robust spring return mechanism. It is compatible with multiple control signals, including 0-10Vdc, 0-5Vdc, 5-10Vdc, and 4-20mA, allowing for precise temperature modulation. The PopTop design facilitates a rapid, tool-free installation directly onto VM series valve bodies (1/2" to 1-1/4"), even after the body has been piped into the system. A built-in magnetic clutch extends the life of the gear train by preventing motor stalling at end-of-travel, while the integrated manual override lever and position indicator allow for streamlined field setup and troubleshooting without a time-out constraint.

• Versatile Control Logic: Supports 0-10Vdc and 4-20mA proportional signals for seamless integration with modern building automation systems.
• Fail-Safe Operation: Reliable spring return ensures the valve moves to the normally open position during power loss for system safety.
• PopTop Efficiency: One-handed mounting with no linkages or calibration required reduces labor time during installation and maintenance.
• Enhanced Durability: The magnetic clutch protects the motor and internal gears from excessive wear during continuous cycling.
• High Pressure Performance: Designed for hot and chilled water applications with up to 50% glycol, supporting system static pressures up to 400 psi.

Is the AP23A000 compatible with older Erie valve bodies?
Yes, the AP23A000 actuator is designed to snap directly onto all Erie PopTop VM series and updated VS series bodies without structural modifications.

What is the difference between this and "floating" models?
Unlike the AT series (tri-state floating), the AP23A000 is an analog proportional model that responds to a specific voltage or current range for precise positioning rather than simple pulse-based control.

Can this be mounted in any orientation?
It should be installed above the valve body in horizontal piping. It can be tilted up to 85 degrees from vertical, but should never be installed where overhead water can drip into the NEMA 1 housing.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.