Veris Industries EP3030S Transducer

Integrating the Veris Industries EP3030S Transducer into your building automation system provides an industrial-grade interface for precise pneumatic control. This electro-pneumatic transducer utilizes advanced micro-controlled coil poppet valve technology to convert electrical signals into proportional pneumatic pressure. Engineered for zero air bleed during steady state, the EP3030S eliminates constant air loss, optimizing compressor run-time and system efficiency in demanding HVACR environments. The unit features field-selectable inputs including 4-20mA, 0-5V, and 0-10VDC, alongside Tri-State or PWM options, ensuring compatibility with virtually any controller on a 24VAC/VDC circuit. With a user-programmable range up to 25 psi and a built-in pressure loss alarm, this model provides real-time status via a 3-1/2 digit backlit LCD and mechanical contact closure for critical fault detection. The SnapTrack mounting simplifies installation for contractors managing complex pneumatic actuated dampers or process control applications.

• Efficient Poppet Valve Technology: Consumes no air at setpoint, significantly reducing air losses compared to traditional bleed-style transducers.
• Selectable Control Inputs: Versatile jumpers allow for 4-20mA current or 0-10VDC voltage signals without swapping hardware.
• Integrated Pressure Loss Alarm: Provides a dedicated contact closure if the desired branch pressure cannot be reached within a set timeframe.
• Manual Override with Set-and-Hold: Facilitates system commissioning and testing even when the main controller is offline.
• High SCIM Air Capacity: Rated for 523 scim at 45 psi supply, ensuring responsive actuation for large pneumatic dampers.

Is the EP3030S compatible with direct AC signals?
The unit accepts DC control inputs by default. For applications requiring AC input signal processing, a secondary triac adapter is required to prevent damage to the internal circuitry.

Can this transducer be used with oxygen or combustible gases?
No. The EP3030S is designed exclusively for use with clean, dry air or inert gases. Use with oxygen service or hazardous media is strictly prohibited.

What is the minimum tubing length required for stable operation?
To prevent oscillation and ensure signal stability, a minimum of 15 feet of 1/8-inch I.D. poly tubing is recommended between the transducer and the branch device.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.