Menu
Cart 0
Weil McLain 451-800-044 Base Front Access Panel, EG-75

Weil McLain 451-800-044 Access Panel

Weil McLain

The Weil McLain 451-800-044 Base Front Access Panel is the lower front panel for the Weil-McLain EG-75 gas boiler. On Weil-McLain's EG-75 replacement parts list it is shown as the base front access panel with the flame rollout switch bracket, and the EG and PEG boiler manual lists it in the front access panel table alongside the other EG sizes. If you are searching for 451-800-044, this is the factory panel.

The base front access panel is the front panel at the base of the boiler, and the flame rollout switch bracket is part of it. The flame rollout switch is a safety device, so the bracket has to be intact and the switch mounted correctly for the safety circuit to do its job. Replace the panel when it is crushed from a past service call, corroded from a leak above it, or the bracket is damaged. Follow the Weil-McLain manual for panel removal and reinstallation, and do not run the boiler with its panels left off.

Weil-McLain gives each boiler size its own panel number, so the 451-800-044 is the part for the EG-75 and should not be assumed to fit a smaller EG. Check the model on the rating plate and confirm it reads EG-75. Send us the model and serial number and our team will confirm the part before it ships.

Key Benefits

  • Exact EG-75 Panel: 451-800-044 is the base front access panel listed by Weil-McLain for the EG-75, so you are working from the factory parts list.
  • Rollout Switch Bracket Included: The Weil-McLain parts list shows the panel with the flame rollout switch bracket, so the safety switch mounting is part of the panel.
  • Safety Switch Mounting: A sound panel with an intact bracket keeps the flame rollout switch mounted the way the factory intended.
  • Factory Fit: An OEM panel is made to the Weil-McLain part number, which saves fabricating or fitting a substitute in the boiler room.

Common Questions

  • What is the Weil McLain 451-800-044? It is the base front access panel for the Weil-McLain EG-75 gas boiler, shown on the factory parts list with the flame rollout switch bracket.
  • Will the 451-800-044 fit a smaller EG boiler? Weil-McLain gives each EG size its own front access panel number, so the 451-800-044 should be ordered for the EG-75 only. Check the model on the rating plate before you buy.
  • When does the access panel need to be replaced? Replace it when it is bent, rusted through or the rollout switch bracket is damaged. Follow the Weil-McLain manual and do not run the boiler with its panels left off.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.