Weil McLain 590-317-631 Silicone Tubing
The Weil McLain 590-317-631 Red Silicone Tubing is the 12 inch, 1/8 inch ID pressure differential switch tubing that the Weil-McLain parts list shows for the HE, VHE and HE-II boiler series. It is a plain length of red silicone tubing, cut to size at the factory, that carries the pressure signal from the boiler to its pressure switch, so the switch can sense the boiler's air and vent pressure. In the product photo it is a smooth orange-red tube with open, square-cut ends. The 590-317-631 is the red 12 in. member of a family of Weil McLain silicone tubes, and the dash numbers tell the tubes apart.
That family matters when you buy. The 590-317-630 is the white 12 in. pressure switch hose that we also carry, the 590-317-632 is a white 7 in. tube, the 590-317-645 is a red 6 in. tube and the 590-317-647 is a red 13-1/2 in. tube. The tubes differ in color and length, so match the number printed on the parts list or the old tube, and measure the old tube if it has shrunk or hardened. A tube that is too short will pull on its barb fittings, and one that is too long can kink and block the signal. Fit the 590-317-631 where the parts list calls for the red 12 in. length.
Pressure switch tubing is easy to overlook and a common cause of nuisance lockouts. A tube that has hardened, cracked, split at the barb or collected condensate can leave the pressure switch reading the wrong pressure, so the boiler shows a vent or airflow fault even though the vent is clear. Check the tube for kinks, pinholes and a loose fit on the barbs, blow it clear if it holds moisture, and replace it when it has gone stiff. Silicone tolerates heat better than ordinary vinyl and stays flexible through repeated heating and cooling cycles. Push the new tube fully onto each barb, keep it away from hot surfaces and sharp edges, and route it with a gentle bend so it cannot pinch.
Key Benefits
- Parts-List Match: The 590-317-631 is the red 12 in. 1/8 in. ID pressure differential switch tubing listed for the HE, VHE and HE-II boilers.
- Silicone Construction: Red silicone tubing stays flexible through repeated heating and cooling cycles and tolerates heat better than ordinary vinyl.
- Cut to Length: Factory cut 12 in. tube, so there is no measuring, trimming or guessing at the pressure switch connection.
- Clear Family Numbers: Sits beside the 590-317-630, 590-317-632, 590-317-645 and 590-317-647 tubes, so you can pick the correct length.
Common Questions
- What size is the 590-317-631? It is 1/8 in. ID red silicone tubing, 12 in. long, listed as pressure differential switch tubing.
- How is it different from the 590-317-630? The 590-317-630 is white and the 590-317-631 is red. Both are 12 in. lengths, but match the number the parts list calls for at your connection.
- When should I replace the tubing? Replace it when it is hardened, cracked, kinked, loose on the barb or holds condensate, since a bad tube can trigger a false pressure switch fault.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.