York 364-47667-007 Valve Kit

The York 364-47667-007 Valve Replacement Kit is a York Applied service kit from the 364-47667 series of valve replacement kits. Kits in this family are built around the valve section of a York compressor: the suction and discharge valves that open and close on every compression cycle so refrigerant gas moves through the machine in one direction only. When that valve hardware wears, cracks, loses spring tension or stops seating, the compressor loses pumping capacity, and a service kit lets you replace the worn pieces in one order instead of hunting down springs, rings and gaskets one at a time.

Think of the valve section as the check valves of the compressor. The suction valve admits low-pressure gas to the cylinder, the discharge valve releases the compressed gas to the condenser side, and the gaskets keep the head and valve assembly sealed so one side cannot bleed into the other. For reference, the documented contents of the sibling 364-47667-006 kit are valve springs, gaskets, a suction valve ring and a discharge valve ring, which gives you a good picture of the kind of hardware this series covers. The 364-47667-007 sits in the same numbering family as the carried 364-47667-009 Top Head Kit, the 364-47667-010 Valve Kit and the 364-47667-006 Top Head Valve Replacement Kit. Each dash number is its own service kit, so the full part number matters: match it to the kit called for on your compressor's parts list rather than substituting a neighboring number.

A worn valve section shows up as low pumping capacity, long run time, an elevated discharge temperature, a suction pressure that will not pull down, or system pressures that equalize quickly after shutdown. Before you order, confirm the diagnosis with a pressure and temperature check. When the kit goes in, clean the sealing surfaces, replace every gasket the kit supplies, seat the new valve hardware per the manufacturer's procedure, and finish with a leak test and evacuation before the system goes back in service. Recover the refrigerant first, and follow your site's lockout procedure.

Key Benefits

• York Series Kit: A factory service kit from the 364-47667 series, so the hardware comes as an OEM-numbered package rather than loose, mixed pieces.
• Restores Pumping Capacity: Fresh valve hardware and gaskets restore the sealing that capacity and efficiency depend on.
• One Number to Order: The full part number, 364-47667-007, identifies exactly which kit you are getting inside the series.
• Pairs With Series Siblings: Neighboring kits such as 364-47667-006, 364-47667-009 and 364-47667-010 are separate listings, so you can match the right one to each compressor.

Common Questions

• What is the 364-47667-007? A York Applied valve replacement kit from the 364-47667 service kit series, used when the valve section of a York compressor needs new hardware.
• Does this kit include gaskets? Valve replacement kits in this series are built around valves, springs and gaskets. Verify the contents against your compressor's parts list before you open the unit.
• Is it interchangeable with 364-47667-010 or 364-47667-006? No. Each dash number is a separate kit. Use the number your parts list calls for.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.