York 364-47667-016 Valve Kit

The York 364-47667-016 Valve Replacement Kit is a York Applied service kit from the 364-47667 series of valve replacement kits. These kits exist to renew the valve section of a York compressor, the suction and discharge valves that open and close on every compression cycle so refrigerant flows through the machine in one direction only. When that valve hardware wears or stops seating, pumping capacity drops, and a numbered service kit is the cleanest way to put factory parts back into the valve section.

A compressor's valve section works like a pair of check valves with a sealed housing. The suction valve lets gas into the cylinder, the discharge valve releases it to the system, and gaskets keep the cylinder head and valve assembly sealed. Springs and valve rings control the motion of the valves and how they seat. The documented contents of the sibling 364-47667-006 kit are valve springs, gaskets, a suction valve ring and a discharge valve ring, which is a useful reference for the kind of hardware this series covers. The 364-47667-016 sits in the same numbering family as the carried 364-47667-009 Top Head Kit, the 364-47667-010 Valve Kit and the 364-47667-006 Top Head Valve Replacement Kit. Each dash number is its own service kit, so the full part number matters: match it to the kit called for on your compressor's parts list rather than substituting a neighboring number.

Look for low pumping capacity, a suction pressure that will not pull down, high discharge temperature, long run time and pressures that equalize quickly after shutdown as signs the valve section needs work. Confirm with a pressure and temperature check first. Recover the refrigerant, clean every sealing surface, replace the gaskets, seat the valve hardware per the manufacturer's procedure, and complete a leak test and evacuation before the system is put back in service.

Key Benefits

• York Series Kit: An OEM-numbered service kit in the 364-47667 series, built for the valve section of a York compressor.
• Restores Seal and Capacity: New valve hardware and gaskets restore the sealing that pumping capacity and efficiency depend on.
• Unique Part Number: 364-47667-016 identifies one specific kit, separate from 364-47667-014, 364-47667-015 and the rest of the series.
• Practical Service Notes: The symptom and service guidance helps you confirm the diagnosis before the compressor is opened.

Common Questions

• What is the 364-47667-016? A York Applied valve replacement kit in the 364-47667 series, used to renew valve hardware in a York compressor's valve section.
• What should I check before ordering? Confirm the symptoms with a pressure and temperature check, and match the full part number against your compressor's parts list.
• Does it match the 364-47667-014? No. Each dash number is a separate kit, so order the number your parts list calls for.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.