York S1-061F8700 Pressure Control
The York Source 1 S1-061F8700 Pressure Control is a replacement HVACR pressure control switch identified with pressure settings of 406/305 PSIG (open/close). This control is intended for compatible York refrigeration and air conditioning equipment requiring a pressure-actuated switching device with the specified operating characteristics.
It monitors system pressure and changes its electrical contact state when the designated pressure thresholds are reached.
The York S1-061F8700 pressure switch has a listed opening pressure of 406 PSIG and closing pressure of 305 PSIG, providing a nominal switching differential of 101 PSI.
The 406/305 PSIG pressure control must be matched to the original equipment specifications, including electrical contact ratings, pressure connection, mounting configuration, and applicable refrigerant system design.
Before installing this York replacement pressure control, verify the equipment model and serial number against the manufacturer's parts documentation. A qualified HVACR technician should follow approved electrical isolation and refrigerant-system safety procedures, check the pressure sensing connection, and verify proper control operation after installation.
Do not substitute a pressure switch with different operating settings unless specifically approved by the equipment manufacturer.
Key Benefits
-
York Source 1 S1-061F8700 replacement part identification.
-
406 PSIG opening pressure and 305 PSIG closing pressure as listed in the product designation.
-
Nominal 101 PSI pressure differential between switching points.
-
Pressure-actuated electrical switching for compatible HVACR equipment.
-
Supports equipment servicing when properly matched to the original control specifications.
-
Allows part-number verification against York equipment documentation.
Common Questions
Q: What are the pressure settings for the York S1-061F8700 control?
A: The supplied product designation lists 406/305 PSIG (open/close), indicating an opening pressure of 406 PSIG and a closing pressure of 305 PSIG. Confirm the manufacturer's specifications before installation.
Q: Can the York S1-061F8700 replace another HVAC pressure switch?
A: Only when the replacement is approved for the equipment and matches the required pressure settings, electrical ratings, pressure connection, and mounting configuration. Similar-looking pressure controls are not necessarily interchangeable.
Q: What should be checked before replacing a York pressure control?
A: Verify actual system pressures, electrical connections, control continuity, refrigerant operating conditions, and the original part number. A pressure-related equipment shutdown does not automatically indicate a defective switch.
Disclaimer
While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.