York S1-TE-6361E-2D Sensor

The York S1-TE-6361E-2D Sensor is a precision-engineered 10k ohm thermistor designed for high-accuracy temperature monitoring in Johnson Controls and York HVAC systems. This genuine OEM replacement part is essential for maintaining proper economizer control and unit performance. As a 12-inch duct probe sensor, it features an integral 1/2-inch NPT adapter and a durable stainless steel probe to resist corrosion in high-humidity environments. This sensor provides the critical feedback needed for the Smart Equipment Control (SEC) board to manage staging and outdoor air dampers effectively.

When troubleshooting, tech-to-tech, verify resistance against standard 10k Type II thermistor curves (e.g., ~11.8k ohms at 70°F) before condemning the board. Common failure points like moisture ingress or condenser coil sensor shorts can trigger "Sensor Fail" alarms, leading to unnecessary compressor lockouts or icing. This assembly includes the metal mounting plate and lead wires required for a standard plenum-rated installation, ensuring seamless integration with existing 22 AWG field wiring. Relying on genuine York parts ensures your sensor signal remains within tight nominal tolerances for optimal system subcooling and superheat calculations.

• Direct OEM Compatibility: Dropped-in replacement for York S1-TE-6361E-2D with no field modification required.
• Durable Construction: Stainless steel 12-inch probe avoids the pitting and drift common with lower-bound aftermarket sensors.
• Plenum Rated: Includes a metal conduit enclosure that meets strict fire and smoke safety requirements for installation in air ducts.
• Accurate Sequencing: Provides the high-resolution data necessary for precise HVAC temperature sensor monitoring and energy-efficient staging.

• How do I test if the York temp sensor is bad? Use a calibrated multimeter to check the resistance (ohms) at the lead wires. A healthy 10k ohm sensor should read approximately 10,000 ohms at 77°F (25°C). Wide deviations usually indicate a short or open circuit.
• Will this work for outdoor air sensing? While primarily a duct probe, this sensor is part of the TE-6300 series versatile enough for various Johnson Controls sensor applications, provided the 12-inch probe length fits the mounting orientation.
• Does this include the mounting plate? Yes, the York S1-TE-6361E-2D comes as a complete assembly including the 4-screw metal mounting plate and NPT adapter.

Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.