Menu
Cart 0

HVAC Refrigeration Guide — OEM Parts

Aerco Boiler Controls: Flow Sensors, Actuators & Diagnostics

Aerco Boiler Controls: Flow Sensors, Actuators & Diagnostics

Aerco's modulating boiler controls require a different diagnostic approach than standard commercial boilers. This guide covers the three components behind most field failures — flow sensors, actuator assemblies, and control boards — with fault patterns, triage tables, and calibration tips for Benchmark and Innovation series units.

Read more →

AAON RTU No Heat? Diagnose Electric Heat, Inducer & Controller

AAON RTU No Heat? Diagnose Electric Heat, Inducer & Controller

Most AAON RTU no-heat service calls trace back to one of three failure points: an open electric heating element, a worn draft inducer that can't close the pressure switch, or a controller that won't communicate. This guide walks through how to confirm which failure you're actually dealing with — before you order a part.

Read more →

Danfoss Compressor & Control Failures: Diagnose Before You Replace

Danfoss Compressor & Control Failures: Diagnose Before You Replace

Danfoss compressor and control failures follow predictable patterns — a scroll that won't start, a reciprocating unit losing capacity, a pressure switch nuisance-tripping, or a TXV that won't hold superheat. This guide breaks down each failure category with diagnostic steps and the current OEM Danfoss part numbers (121L3070, MTZ160-4VI, 060-200191, 068U2287) to resolve them correctly the first time.

Read more →

BASO Standing Pilot Failures: Thermocouple & Gas Valve Diagnosis

BASO Standing Pilot Failures: Thermocouple & Gas Valve Diagnosis

Standing pilot systems that won't hold flame or won't open the main gas valve almost always trace to a failing thermocouple or a faulty gas valve. This guide walks through how to confirm which BASO part is actually at fault — and which replacement fits your unit — before you order anything.

Read more →

Mitsubishi Mini-Split E6/UP: Fix Communication & Control Board Faults

Mitsubishi Mini-Split E6/UP: Fix Communication & Control Board Faults

Mitsubishi Electric MXZ systems throwing E6 or UP codes almost always point to communication wiring or the outdoor control board — not the compressor. This guide walks through the correct diagnostic sequence, explains why control boards are model-line specific, and covers outdoor fan motor failures that show up without any error code at all.

Read more →